HC/49US (AT49) MICROPROCESSOR CRYSTAL ABL2 Series RoHS/RoHS II Pb 11.5 x 5.0 x 2.5 mm Moisture Sensitivity Level (MSL) This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: APPLICATIONS: Reduced height at 2.5mm Home electronics High reliability & Low Cost Computers, modems, and communications Tight stability & extended temperature High-precision TCXO and clock applications Proven resistance welded metal package Microprocessors STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units Notes Frequency Range 3.579545 70 Fundamental AT- 3.579545 24.0 cut (Standard) rd 3 OT AT-cut MHz 24.01 70.00 Operation mode (Standard) Fundamental AT- 24.01 50.00 cut or BT-cut (See options) Operating Temperature 0 +70 C See options Storage Temperature -55 +125 C Frequency Tolerance -50 +50 ppm See options Frequency Stability over the Operating -50 +50 ppm See options Temperature ( ref. to +25C) Equivalent series resistance (R1) See table 1 below Shunt capacitance (C0) 7 pF Load capacitance (CL) 18 pF See options Drive Level 100 1000 W Aging 25C per year 5 ppm Insulation Resistance 500 M 100Vdc 15V frequency (Max 10 ppm Min) Drive Level Dependency (DLD, Minimum 7 points tested: from 1W to 25% of Max ESR (Max Min) 500W) ESR Max ESR in Max ESR over DLD Table 1 range Table 1 Frequency (MHz) ESR() max. 3.579 - 4.999 (Fund.) 180 5.000 - 5.999 (Fund.) 120 6.000 - 7.999 (Fund.) 100 8.000 - 8.999 (Fund.) 80 9.000 - 9.999 (Fund.) 60 10.000 - 15.999 (Fund.) 50 16.000 - 50.000 (Fund.) 40 24.01 - 31.999 (3rd O/T) 100 32.000 - 70.00 (3rd O/T) 80 Visit www.abracon.com for Terms & Conditions of Sale Revised: 04.21.16 ABRACON IS ABRACON IS ISO 9001 / QS 9000 ISO 9001:2008 30332 Esperanza, Rancho Santa Margarita, California 92688 CECERRTIFIEDTIFIED tel 949-546-8000 fax 949-546-8001 www.abracon.comHC/49US (AT49) MICROPROCESSOR CRYSTAL ABL2 Series RoHS/RoHS II Pb 11.5 x 5.0 x 2.5 mm OPTIONS AND PART IDENTIFICATION: ABL2 - MHz- - - - - - Packaging Frequency in MHz Please specify the Blank: Bulk frequency in T: Tape & Reel xx.xxxxMHz. TRAY: Tray e.g. 14.3181MHz Load Capacitance (pF) Please specify CL Value Added (Minimum 10pF) in pF I Insulator Tab or S for series L2 Middle 3rd lead QXX Trimmed leads Custom ESR if other Q15 for 0.15 length than standard Oscillation Mode R : Specify a value in F: Fund. AT>24MHz (e.g.: R40) FB***: Fund. BT>24MHz Operating Temp. Freq. Tolerance Freq. Stability Blank: 0C ~ +70C Blank: 50 ppm Blank: 50 ppm A: -10C ~ +60C H5: 5 ppm U**: 10 ppm B: -20C ~ +70C 1: 10 ppm G: 15 ppm C: -30C ~ +70C 7: 15 ppm X: 20 ppm N: -30C ~ +85C 2: 20 ppm W: 25 ppm D: -40C ~ +85C 3: 25 ppm Y: 30 ppm J*: -40C ~ +105C 4: 30 ppm H: 35 ppm K*: -40C ~ +125C Q: 100 ppm L*: -55C ~ +125C R: 150 ppm NOTE: * Frequency stability 50ppm, 100ppm, 150ppm only. Contact ABRACON for tighter frequency stability. ** -10C to +60C only. *** Fundamental BT frequency stability 100ppm max at -10C ~ +60C only. Visit www.abracon.com for Terms & Conditions of Sale Revised: 04.21.16 ABRACON IS ABRACON IS ISO 9001 / QS 9000 ISO 9001:2008 30332 Esperanza, Rancho Santa Margarita, California 92688 CECERRTIFIEDTIFIED tel 949-546-8000 fax 949-546-8001 www.abracon.com