AMCA52-2R710G-S1F-T ABRACON

Surface Mount WiMAX Antenna (2710MHz) RoHS / RoHS II Compliant Pb AMCA52-2R710G-S1F-T 5.2 x 2.1 x 1.0mm Moisture Sensitivity Level (MSL) MSL = 1 FEATURES: APPLICATIONS: 2710MHz, Bandwidth 200MHz Wireless application - WiMax bands. Suitable for RoHS compliant reflow User Equipments (UE), e.g. dongles, modems Gain 2.5dBi (Peak) / 0.5dBi (Average) User Equipments applications covering 2710MHz WiMax bands. VSWR <2:1 Alternative to larger PCB solution Small size 5.2 x 2.1 x 1.0mm (0.204 x 0.082 x 0.039inch) Non Ground Mounting type. Power Handling 3W Max Matched to 50 Ohm STANDARD SPECIFICATIONS Maximum Ratings Item Value Operating Temperature Range -40C to + 85C Storage Temperature Range -10C ~ +40 and RH C 70% (Max.) Electrical Characteristics Item Spec Frequency 2710MHz Bandwidth 200MHz Peak Gain 2.5 dBi typ. Average Gain 0.5 dBi ty p VSWR <2:1 Impedance 50 Ohm Power Capability 3W max PART IDENTIFICATION: AMCA52-2R7100G-S1F-T4 Packaging Blank: Bulk or Cut Tape T4 : T/R 4000pcs per reel REVISED: 05.17.2017 5101 Hidden Creek Lane Spicewood TX 78669 ABRACON IS Phone: 512-371-6159 Fax: 512-351-8858 ISO9001-2008 For terms and conditions of sale visit: www.abracon.com CERTIFIEDSurface Mount WLAN Antenna (2710MHz) RoHS / RoHS II Compliant Pb AMCA52-2R710G-S1F-T 5.2 x 2.1 x 1.0mm OUTLINE DIMENSIONS: Recommended Land Pattern Series A B C D E F G H I AMCA52 5.20.2 2.10.2 1.00.2 0.50.2 2.00.2 1.50.2 1.00.2 4.00.2 1.40.2 (Dimensions: mm) REFLOW PROFILE: Preheat condition: 150 ~200 /60~120C sec. Allowed time above 217C: 60~90sec. Max temp: 260C Max time at max temp: 10sec. Solder paste: Sn/3.0Ag/0.5Cu Allowed Reflow time: 2x max Note: The reflow profile in the above table is only for qualification and is not meant to specify board assembly profiles. Actual board assembly profiles must be based on the customer s specific board design, solder paste and process, and should not exceed the parameters as the Reflow profile shows. MANUAL SOLDERING Pre-heating Temperature: 120C, 60 C ~ 300 sec . Iron soldering power: Max.30W. Pre-heating: 150 / 60 sec. C. Soldering Tip temperature: 350 Max. C. Soldering time: 3 sec Max. Solder paste: Sn/3.0Ag/0.5Cu. Max 1 times for iron soldering. Soldering Temperature: 340C5C, 5sec max per each terminal. Note: Take care not to apply the tip of the soldering iron to the terminal electrodes. REVISED: 05.17.2017 5101 Hidden Creek Lane Spicewood TX 78669 ABRACON IS Phone: 512-371-6159 Fax: 512-351-8858 For terms and conditions of sale visit: ISO9001-2008 www.abracon.com CERTIFIED