X-On Electronics has gained recognition as a prominent supplier of AOCJY3-38.880MHZ-E OCXO Oscillators across the USA, India, Europe, Australia, and various other global locations. AOCJY3-38.880MHZ-E OCXO Oscillators are a product manufactured by ABRACON. We provide cost-effective solutions for OCXO Oscillators, ensuring timely deliveries around the world.
We are delighted to provide the AOCJY3-38.880MHZ-E from our OCXO Oscillators category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the AOCJY3-38.880MHZ-E and other electronic components in the OCXO Oscillators category and beyond.
OVEN CONTROLLED CRYSTAL OSCILLATOR RoHS Pb Compliant FEATURES: APPLICATIONS: STANDARD SPECIFICATIONS: m pi l m Overall Frequency Range (Note 1) n H a o m (Note 2) o Hi (Note 2) o o % a o Sin a Po a Stabilit a C on n Stabilit tion (Note 3) C to ppb Sp C to ppb C to ppb S S pp ppb n % ppb a ppb < min Co mption Co mption n Note 1: Carrier frequency 100.000MHz is not offered Vdd=12.0V Note 2: When Vdd=12.0V Level 1 = 4.50 V minimum Level 0 = 0.50V maximum Note 3: 5.00 ppb stability is only available for F0 40MHz. For frequencies above 40MHz, the best available frequency stability is 10.00 ppb over -20C to +70C REVISED: 07/05/2018 1501 Hidden Creek Lane Spicewood TX 78751 ABRACON IS Phone: 949-546-8000 Fax: 949-546-8001 LLC ISO9001-2015 For terms and conditions of sales visit: www.abracon.com CERTIFIEDOVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY3 Series RoHS 25.4x 25.4 x 13.0 mm Pb Compliant STANDARD SPECIFICATIONS - continued. Parameters Minimum Typical Maximum Units Notes Aging Daily 1.0 ppb First Year 100 ppb 10-Years 500 ppb Spectral Content Spurious Response -35 dBc Phase Noise (10MHz Carrier) 5V 1 Hz offset -90 dBc 10 Hz offset -120 dBc 100 Hz offset -140 dBc 1,000 Hz offset -145 dBc 10,000 Hz offset -155 dBc Electrical Frequency Adjustment Control Voltage Range (Vc) 0.0 Vdd Volts Frequency Pull Range 0.700 ppm Frequency Pull Slope Positive Control Voltage Port Impedance 10 k Center Control Center Control Voltage (Note 4) Vdd/2 (Vdd/2) +0.5 Volts Voltage (Vdd/2) -0.5 Control Port Linearity 10 % Reference Voltage (Vdd=3.3V) 2.70 2.80 2.90 Volts Output Pin 4 Reference Voltage (Vdd=5.0V) 4.40 4.50 4.60 Volts Output Pin 4 Reference Voltage (Vdd=12.0V) 4.90 5.00 5.10 Volts Output Pin 4 Storage Temperature -40 +100 C Note 4: When Vdd=12.0V, Control Voltage Range is 0.0V to 5.0V and therefore, the Center Control Voltage is (2.50V0.50V) OPTIONS AND PART IDENTIFICATION (Left blank if standard) AOCJY3 - - MHz - - Supply Voltage Option RF Output Options Blank: 3.30V Blank: CMOS A: 5.00V SW: Sinewave B: 12.00V (*) (*) Frequency Range limited to 10 40MHz Frequency in MHz Temperature Options Such as 10.000 MHz E: -20C to +70C 26.000 MHz F: -40C to +75C 100.000 MHz REVISED: 07/05/2018 1501 Hidden Creek Lane Spicewood TX 78751 ABRACON IS Phone: 949-546-8000 Fax: 949-546-8001 ISO9001-2015 LLC For terms and conditions of sales visit: www.abracon.com CERTIFIED