LOW PROFILE LEADED INDUSTRIAL GRADE AWCR-RS BUILT-IN CAPACITANCE CERAMIC RESONATOR RoHS/RoHS II Compliant AWCR-RS Pb in ceramic, exemption (7c-I) Size Varies FEATURES: APPLICATIONS: Built-in capacitors save space & components. Microprocessor clocks. Industrial controllers. Low cost timing solution. Electric appliances. General timing. Small size, Light weight. Remote controls. ELECTRICAL CHARACTERISTICS: Parameters Minimum Typical Maximum Units Notes Frequency Range 6.01 12.50 MHz Resonant Impedance (Ro) 25 Frequency Tolerance -0.5 +0.5 % Frequency Stability -0.3 +0.3 % -25C to +85C Withstanding Voltage 100 Vdc 5 secs D.C. Voltage 6 Vdc Rating Voltage A.C. Voltage 15 Vp-p. Load Capacitance 12 15 18 pF Insulation Resistance 500 M 10Vdc, 1min Operation Temperature -25 +85 C Storage Temperature -40 +85 C Aging Rate (Fosc) -0.3 0.3 % From initial value TEST CONDITION AND TEST CIRCUIT: Parts shall be mea sured under a cond ition X: Ceramic Resonator (Temp.: 2015C, Humidity: 6520% R.H.) C1=C2 unless the standard con dition (Temp: 253C, 1.Input 2.Ground 3.Output Humidity: 6510% R.H.) is regulated to me asure OPTIONS & PART IDENTIFICATION: AWCR - RS - C - Frequency Load Capacitance in pF Packaging Contact ABRACON for Blank: Bulk Frequency in MHz A: AMMO package* Load Capacitance options *AMMO package if not standard lead length 13.5mm Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.07.13 ABRACON IS ABRACON IS 30332 Esperanza, Rancho Santa Margarita, California 92688 ISO9001:2008 CECERRTIFIED TIFIED tel 949-546-8000 fax 949-546-8001 www.abracon.comAWCR-RS Series LOW PROFILE L EADED LOW PROFILE LEADED LOW PROFILE LEADED LOW PROFILE LEADED INDUSTRIA L GRADE INDUSTRIAL GRADE BUILT-IN INDUSTRIAL GRADE BUILT-IN AWCR-RS INDUSTRIAL GRADE BUILT-IN CAPACITANCE CERAMIC BUILT-IN CAPACICAPTAANCE CERAMIC RCITANCE CERAMIC ESONATOR CAPACITANCE CERAMIC RESONATOR RERESSONATORONATOR th RoHS/RoHS II Compliant AWCR-RS July 19 , 2012 5.5 x 3.0 x 5.0mm th th ssue: July 19 , 2012 5.5 x 3.0 x 5.0mm Pb in ceramic, exemption (7c-I) Size Varies uly 19 , 2012 5.5 x 3.0 x 5.0mm ) of (10) Abracon Drawing 452751 Revision : C Page (6) of (10) Abracon Drawing 452751 Revision : C of (10) Abracon Drawing 452751 Revision : C OUTLINE DRAWING: mensions ne Dimensions AMMO Pack Bulk Pack mensions AMM AOM PMaOck P: ack: AMM O Pack: : Pack: Dimensions: mm Packaging: Bulk: 500pcs/plastic bag AMMO: 2000pcs/box Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the prod- Dimension: mm uct will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according Dimension: mm to MSL 1 requirements to maintain solderabilit y. Dimension: mm CAUTION (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) This component is not hermetically sealed. Do not clean or wash the component. (3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. (4) Do not expose the component to open flame. (5) This specification applies to the functionality of the component as a single unit. (6) Storage Conditions: If the product is to be stored for a period greater than 1 year after the Delivery Date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. (7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high- reliabilit, y life dependant applications. ContactAbracon Corporation prior to using this product when in doubt. mm ATTENTION: Abracon Corporations products are COTS Commercial-Off-The-Shelf products suitable for Commercial, Industrial and, where designated, Automotive Applica- tions. Abracons products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.07.13 ABRACON IS ABRACON IS 30332 Esperanza, Rancho Santa Margarita, California 92688 ISO9001:2008 CECERRTIFIED TIFIED tel 949-546-8000 fax 949-546-8001 www.abracon.com