E1SDA18-22.000M
(Data Sheet downloaded on Jul 21, 2020)
REGULATORY COMPLIANCE
2011/65 +
191 SVHC
2015/863
ITEM DESCRIPTION
Quartz Crystal Resonator HC49/UP Short 2 Pad Surface Mount (SMD) 3.2mm Height Metal Resistance Weld Seal 22.000MHz
30ppm at 25C, 50ppm over 0C to +70C 18pF Parallel Resonant
ELECTRICAL SPECIFICATIONS
Nominal Frequency 22.000MHz
Frequency Tolerance/Stability 30ppm at 25C, 50ppm over 0C to +70C
Aging at 25C 5ppm/year Maximum
Load Capacitance 18pF Parallel Resonant
Shunt Capacitance 7pF Maximum
Equivalent Series Resistance 50 Ohms Maximum
Mode of Operation AT-Cut Fundamental
Drive Level 1mWatt Maximum
Storage Temperature Range -55C to +125C
Insulation Resistance 500 Megaohms Minimum (Measured at 100Vdc)
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500V
Fine Leak Test MIL-STD-883, Method 1014, Condition A
Flammability UL94-V0
Gross Leak Test MIL-STD-883, Method 1014, Condition C
Mechanical Shock MIL-STD-202, Method 213, Condition C
Moisture Resistance MIL-STD-883, Method 1004
Moisture Sensitivity J-STD-020, MSL1
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K
Resistance to Solvents MIL-STD-202, Method 215
Solderability MIL-STD-883, Method 2003
Temperature Cycling MIL-STD-883, Method 1010, Condition B
Vibration MIL-STD-883, Method 2007, Condition A
www.ecliptek.com | Specification Subject to Change Without Notice | Revision H 11/09/2015 | Page 1 of 4
Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200E1SDA18-22.000M
MECHANICAL DIMENSIONS (all dimensions in millimeters)
LINE MARKING
1 E22.000M
E=Ecliptek Designator
3.20
MAX
13.30 MAX
4.85
MAX
4.88 0.20 0.50 MIN (x2)
0.80 0.30 (x2)
11.60 MAX NOTE: Coplanarity 0.360 MAX
Suggested Solder Pad Layout
All Dimensions in Millimeters
5.5 (X2)
2.0 (X2)
4.0 Solder Land
(X2)
All Tolerances are 0.1
www.ecliptek.com | Specification Subject to Change Without Notice | Revision H 11/09/2015 | Page 2 of 4
Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200