RoHS Pb E1SGA18-25.000M TR E1S G A 18 -25.000M TR Series Packaging Options RoHS Compliant (Pb-free) Resistance Welded Short Tape & Reel HC-49/UP SMD Crystal Nominal Frequency Frequency Tolerance/Stability 25.000MHz 15ppm at 25C, 30ppm over 0C to +70C Load Capacitance Mode of Operation 18pF Parallel Resonant AT-Cut Fundamental ELECTRICAL SPECIFICATIONS Nominal Frequency 25.000MHz Frequency Tolerance/Stability 15ppm at 25C, 30ppm over 0C to +70C Aging at 25C 5ppm/year Maximum Load Capacitance 18pF Parallel Resonant Shunt Capacitance (C0) 7pF Maximum Equivalent Series Resistance 40 Ohms Maximum Mode of Operation AT-Cut Fundamental Drive Level 1mWatt Maximum Storage Temperature Range -40C to +125C Insulation Resistance 500 Megaohms Minimum at 100Vdc ENVIRONMENTAL & MECHANICAL SPECIFICATIONS Fine Leak Test MIL-STD-883, Method 1014 Condition A Gross Leak Test MIL-STD-883, Method 1014 Condition C Lead Termination Sn 2m - 6m Mechanical Shock MIL-STD-202, Method 213 Condition C Resistance to Soldering Heat MIL-STD-202, Method 210 Resistance to Solvents MIL-STD-202, Method 215 Solderability MIL-STD-883, Method 2003 Temperature Cycling MIL-STD-883, Method 1010 Vibration MIL-STD-883, Method 2007 Condition A MECHANICAL DIMENSIONS (all dimensions in millimeters) LINE MARKING 1 E25.000M E=Ecliptek Designator 3.20 M=MHz MAX 13.30 MAX 4.85 MAX 4.88 0.20 0.50 MIN (x2) 0.80 0.30 (x2) 11.60 MAX NOTE: Coplanarity 0.360 MAX www.ecliptek.com Specification Subject to Change Without Notice Rev F 8/12/2010 Page 1 of 5E1SGA18-25.000M TR Suggested Solder Pad Layout All Dimensions in Millimeters 5.5 (X2) 2.0 (X2) 4.0 Solder Land (X2) All Tolerances are 0.1 www.ecliptek.com Specification Subject to Change Without Notice Rev F 8/12/2010 Page 2 of 5