PART NUMBER DATA SHEET
EC1100HSETTS-4.000M
ITEM DESCRIPTION
4.000MHz 100ppm -40C to +85C
ELECTRICAL SPECIFICATIONS
Nominal Frequency 4.000MHz
Frequency Tolerance/Stability 100ppm Maximum (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating
Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25C, Shock, and Vibration)
Aging at 25C 5ppm/year Maximum
Operating Temperature Range -40C to +85C
Supply Voltage 5.0Vdc 10%
Input Current 45mA Maximum
Output Voltage Logic High (Voh) 2.4Vdc Minimum with TTL Load, Vdd-0.5Vdc Minimum with HCMOS Load
Output Voltage Logic Low (Vol) 0.4Vdc Maximum with TTL Load, 0.5Vdc Maximum with HCMOS Load
Rise/Fall Time 6nSec Maximum (Measured at 0.4Vdc to 2.4Vdc with TTL Load; Measured at 20% to 80% of waveform with HCMOS
Load)
Duty Cycle 50 10(%) (Measured at 1.4Vdc with TTL Load or at 50% of Waveform with HCMOS Load)
Load Drive Capability 10TTL Load or 50pF HCMOS Load Maximum
Output Logic Type CMOS
Pin 1 Connection Tri-State (High Impedance)
Tri-State Input Voltage (Vih and Vil) +2.2Vdc Minimum to enable output, +0.8Vdc to disable output (High Impedance), No connect to enable output.
Absolute Clock Jitter 100pSec Maximum
One Sigma Clock Period Jitter 25pSec Maximum
Start Up Time 10mSec Maximum
Storage Temperature Range -55C to +125C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
Fine Leak Test MIL-STD-883, Method 1014, Condition A
Gross Leak Test MIL-STD-883, Method 1014, Condition C
Lead Integrity MIL-STD-883, Method 2004
Mechanical Shock MIL-STD-202, Method 213, Condition C
Resistance to Soldering Heat MIL-STD-202, Method 210
Resistance to Solvents MIL-STD-202, Method 215
Solderability MIL-STD-883, Method 2003
Temperature Cycling MIL-STD-883, Method 1010
Vibration MIL-STD-883, Method 2007, Condition A
www.ecliptek.com | Specification Subject to Change Without Notice | 14 Pin DIP Revision K 08/18/2006 | 8 Pin DIP Revision K
Ecliptek Corporation 3545 Cadillac Ave., Costa Mesa, CA 92626 1-800-ECLIPTEK or 714.433.1200 PART NUMBER DATA SHEET
EC1100HSETTS-4.000M
MECHANICAL DIMENSIONS (all dimensions in millimeters)
PIN CONNECTION
1 Tri-State (High
7.620 0.203 0.8 0.1 (X3)
Impedance)
1
4
4 Case Ground
DIA 0.457
7.620 5 Output
0.1 (X4)
0.203
5 8 Supply Voltage
8
LINE MARKING
5.08 MIN
1 ECLIPTEK
2 EC11TS
5.6 MAX
EC11=Product Series
MARKING
13.2
3 4.0000M
ORIENTATION
MAX
4 XXYZZ
XX=Ecliptek Manufacturing
Code
13.2
Y=Last Digit of Year
MAX
ZZ=Week of Year
www.ecliptek.com | Specification Subject to Change Without Notice | 14 Pin DIP Revision K 08/18/2006 | 8 Pin DIP Revision K
Ecliptek Corporation 3545 Cadillac Ave., Costa Mesa, CA 92626 1-800-ECLIPTEK or 714.433.1200