R
PART NUMBER DATA SHEET
ECLIPTEK
CORPORATION
EH2625TS-50.000M
(Data Sheet downloaded on May 22, 2017)
REGULATORY COMPLIANCE
2011/65 +
173 SVHC
2015/863
ITEM DESCRIPTION
Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)
50.000MHz 25ppm 0C to +70C
ELECTRICAL SPECIFICATIONS
Nominal Frequency 50.000MHz
Frequency Tolerance/Stability 25ppm Maximum (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating
Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25C, Shock, and Vibration)
Aging at 25C 5ppm/year Maximum
Operating Temperature Range 0C to +70C
Supply Voltage 3.3Vdc 10%
Input Current 35mA Maximum (No Load)
Output Voltage Logic High (Voh) 2.7Vdc Minimum (IOH= -8mA)
Output Voltage Logic Low (Vol) 0.5Vdc Maximum (IOL= +8mA)
Rise/Fall Time 6nSec Maximum (Measured at 20% to 80% of waveform)
Duty Cycle 50 10(%) (Measured at 50% of waveform)
Load Drive Capability 30pF Maximum
Output Logic Type CMOS
Pin 1 Connection Tri-State (High Impedance)
Tri-State Input Voltage (Vih and Vil) 70% of Vdd Minimum to enable output, 20% of Vdd Maximum to disable output, No Connect to enable output.
Absolute Clock Jitter 250pSec Maximum, 100pSec Typical
One Sigma Clock Period Jitter 50pSec Maximum, 40pSec Typical
Start Up Time 10mSec Maximum
Storage Temperature Range -55C to +125C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500V
Fine Leak Test MIL-STD-883, Method 1014, Condition A
Flammability UL94-V0
Gross Leak Test MIL-STD-883, Method 1014, Condition C
Mechanical Shock MIL-STD-883, Method 2002, Condition B
Moisture Resistance MIL-STD-883, Method 1004
Moisture Sensitivity J-STD-020, MSL 1
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K
Resistance to Solvents MIL-STD-202, Method 215
Solderability MIL-STD-883, Method 2003
Temperature Cycling MIL-STD-883, Method 1010, Condition B
Vibration MIL-STD-883, Method 2007, Condition A
www.ecliptek.com | Specification Subject to Change Without Notice | Revision G 06/06/2012 | Page 1 of 6
Ecliptek Corporation 3545 Cadillac Ave., Costa Mesa, CA 92626 1-800-ECLIPTEK or 714.433.1200R
PART NUMBER DATA SHEET
ECLIPTEK
CORPORATION
EH2625TS-50.000M
MECHANICAL DIMENSIONS (all dimensions in millimeters)
PIN CONNECTION
1 Tri-State (High
7.00 5.08
Impedance)
0.15 0.15
2 Ground
3 4
3 Output
MARKING 2.20 4 Supply Voltage
5.00
ORIENTATION 0.15
0.15
LINE MARKING
2 1
1 ECLIPTEK
2 50.000M
1.4 0.2
1.4 0.1
3 XXXXX
XXXXX=Ecliptek
3.68
Manufacturing Identifier
0.15
1.60 0.20
Suggested Solder Pad Layout
All Dimensions in Millimeters
2.0 (X4)
2.2 (X4)
Solder Land
2.88
(X4)
1.81
All Tolerances are 0.1
www.ecliptek.com | Specification Subject to Change Without Notice | Revision G 06/06/2012 | Page 2 of 6
Ecliptek Corporation 3545 Cadillac Ave., Costa Mesa, CA 92626 1-800-ECLIPTEK or 714.433.1200