2.5 mm x 3.2 mm Ceramic Package SMD TCXO I547/I747 Series Product Features: Applications: 3.200.10 Low Jitter, Non-PLL Based Output GPS Clipped Sinewave Sonet /SDH Analog Compensation 802.11 / Wifi Marking 2.500.10 Available 0.5 ppm Stability T1/E1, T3/E3 Frequency 10Mhz to 52 Mhz 1.00 max Frequency Tolerance 25 C 2.0 ppm after second reflow 1.80 0.60 Frequency Stability Vs Temperature See Frequency Stability Table Vs Supply Voltage ( 5%) 0.2 ppm Max. 12 0.60 Vs Load (10%) .0.2 ppm Max. Output Level 43 Clipped Sinewave 0.8 V p-p Min. 0.85 Output Load Clipped Sinewave 10K Ohms / 10 pF 2.40 Frequency Slope 0.1 ppm / C (2C steps from -20 C to +70 C) Start Time (90% of Vp-p) 3.0 mS Max. 2.00 Aging 1 ppm / Year Max. Supply Voltage See Supply Voltage Table , tolerance 5% 1.30 Current 1.5 mA Max 1.20 Voltage Control 1.5 VDC 1.0 VDC, 5.0 ppm Min. Suggested Land Pattern (I747) Operating See Operating Temperature Table Pin Connections Volt Control or N/C Pin 1 Storage -40 C to +85 C Pin 2 Ground Pin 3 Output Phase Noise (typical) -87 dBc/Hz 10 Hz Voltage Supply Pin 4 -112 dBc/Hz 100 Hz -135 dBc/Hz 1KHz Dimensions in mm -145 dBc/Hz 10 Khz Part Number Guide Sample Part Number: I547-1Q3-20.000 Mhz Package Operating Temperature FrequencyStability vs Temperature Supply Voltage Frequency 7 = 0 C to +50 C **Y = 0.5 ppm 3 = 3.3 V I547 (Clipped Sinewave TCXO) 7 = 3.0 V 1 = 0 C to +70 C **N = 1.0 ppm I747 (Clipped Sinewave 3 = -20 C to +70 C **O = 1.5 ppm 2 = 2.7 V TCVCXO) 1 = 1.8 V - 20.000 MHz 5 = -30 C to +85 C **P = 2.0 ppm 2 = -40 C to +85 C Q = 2.5 ppm R = 3.0 ppm J = 5.0 ppm NOTE: A 0.01 F bypass capacitor is recommended between Vcc (pin 4) and GND (pin 2) to minimize power supply noise. ** Not available for all temperature ranges. Rev: 06/18/15 J ILSI America Phone 775-851-8880 Fax 775-851-8882 email: e-mail ilsiamerica.com www.ilsiamerica.com Specifications subject to change without notice Page 1 of 2 2.5 mm x 3.2 mm Ceramic Package SMD TCXO I547/I747 Series Pb Free Solder Reflow Profile: Typical Application: *Units are backward compatible with 240C reflow processes Package Information: MSL = N.A. (package does not contain plastic, storage life is unlimited under normal room conditions). Termination = e4 (Au over Ni over W base metallization). Tape and Reel Information: Quantity per 1000 Reel A 8 +/-.3 B 4 +/-.2 C 3.5 +/-.2 D 9 +/-1 or 12 +/-3 E 60 / 80 F 180 Environmental Specifications Thermal Shock MIL-STD-883, Method 1011, Condition A Moisture Resistance MIL-STD-883, Method 1004 Mechanical Shock MIL-STD-883, Method 2002, Condition B Mechanical Vibration MIL-STD-883, Method 2007, Condition A Resistance to Soldering Heat J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Hazardous Substance Pb-Free / RoHS / Green Compliant Solderability JESD22-B102-D Method 2 (Preconditioning E) Terminal Strength MIL-STD-883, Method 2004, Test Condition D Gross Leak MIL-STD-883, Method 1014, Condition C Fine Leak MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s Solvent Resistance MIL-STD-202, Method 215 Marking Line 1: I-Date Code (yww) Line 2: Frequency PROPRIETARY AND CONFIDENTIAL THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America. Rev: 06/18/15 J ILSI America Phone 775-851-8880 Fax 775-851-8882 email: e-mail ilsiamerica.com www.ilsiamerica.com Specifications subject to change without notice Page 2 of 2