Quiet 4U Rackmount Chassis with Dual ACP-4320 Hot-Swap SATA HDD Trays Features Supports either an ATX motherboard or a PICMG backplane with up to 15 slots Supports dual SATA hot-swap HDD trays LED indicators and alarm notification for system fault detection Low noise system fans Built-in Intelligent System Module enabling whole system fan control and remote manageability Specifications External Internal 5.25 2 - Driver Bay 3.5 1 SATA Tray - Hot Swap 2 (compatible with 3.5 or 2.5 devices) Fan 1(12 cm/74 CFM) + 1 (6cm / 28 CFM) Air Filter Yes Cooling System fan speed referring to chassis thermal sensor, or CPU temperature Smart Fan (Available with selected Advantech MBs/CPU cards) Front I/O Interface USB 2.0 2 LED Indicators Power, HDD, temperature, fan, LAN1 and LAN2 Miscellaneous Backplane version: One 9-pin D-Sub opening Rear Panel Motherboard version: Five 9-pin D-Sub opening and one 25-pin D-sub opening CPU/System fan speed, CPU/system temperature, motherboard voltage Intelligent System Module (Only selected Advantech MBs/CPU cards with WISE-PaaS/RMM installed can fully enable these functions, check with Advantech local rep. for Remote Monitoring detailed information.) Operating Non-Operating Temperature 0 ~ 40 C (32 ~ 104 F) - 20 ~ 60 C (-4 ~ 140 F) Environment Humidity 10 ~ 85% 40 C , non-condensing 10 ~ 95% 40 C, non-condensing Vibtration (5 ~ 500 Hz) 1 Grms 2 G Shock 10G ( with 11 ms duration, half sine wave ) Dimension (W x H X D) 482 x 177 x 479 mm (19 x 7.0 x 18.9 ) Physical Characterisitics Weight 17.6 kg (38.7lb) Front View Inside View Easy-to-maintain system fan Two 5.25 drive bays System reset button Alarm reset button Two SATA HDD Dual USB trays ports Industrial Chassis All product specifications are subject to change without notice. Last updated: 10-Apr-2019ACP-4320 Dimensions Unit: mm inch MB version BP version 101.6 4.00 526.4 20.74 177.0 6.97 478.6 18.86 92.0 92.0 92.0 98.0 3.62 3.62 3.62 3.86 Ordering Information Spare Parts Part number Power supply Wattage Switch type Part Number Description Backplane version 1990001299 Fan filter 95 x 130 mm ACP-4320BP-25BE PS8-250ATX-ZE 250W ATX 1990001298 Door filter 150 x 68 mm ACP-4320BP-40BE PS8-400ATX-ZE 400W ATX ACP-4320BP-50BE PS8-500ATX-ZE 500W ATX Motherboard version ACP-4320MB-25BE PS8-250ATX-ZE 250W ATX ACP-4320MB-40BE PS8-400ATX-ZE 400W ATX ACP-4320MB-50BE PS8-500ATX-ZE 500W ATX Optional Accessories Part Number Description Mobile rack for converting a 3.5 drive bay to dual IPC-DT-3120E 2.5 SATA HDD trays Mobile rack for converting dual 5.25 drive bays to IPC-DT-5230E three 3.5 SATA HDD trays 1700007351 M Cable SATA 7P/SATA 7P 40CM C=R 90/180 Power cable for GPU card (Two 4-pin 12V connectors 1700029268-01 to one 6+2 pins PCIe power connector) Power cable for GPU card (Two B4P Molex 1700024754-01 connectors to one 6+2 pins PCIe power connector) * When choosing ASMB-7 series for system mother board, 2pcs right-angle SATA cable (PN: 1700007351) are necessary for hot-swap driver bay. * If GPU card with 2 power connectors, please use 1700029268-01*1 + 1700024754- 01*1 If GPU card with 1 power connector, please use 1700029268-01. * Only 500W or higher wattage PSU support 1700029268-01 and 1700024754-01 for high-end GPU card. Online Download www.advantech.com/products 172.7 6.80 426.0 16.78 86.4 3.40 468.0 18.44 482.0 18.99