10-597107-173

MS/Standard solder contacts Machined copper alloy contacts in a full range of sizes, with closed entry socket design in the size 12 and 16 contacts. A heavy silver- plated finish is deposited on all MS style solder contacts for maximum corrosion resistance, maximum current carrying capacity and low milli- volt drop. MS/STANDARD SOLDER CONTACTS* TABLE I CONTACT ARRANGEMENT SERVICE RATING Mating Wire Allowable Test Part Pin/ End Barrel Wire Current** Recommended Number Socket Size Size Size Amps Effective Operating Voltage* MS Creepage Mechanical at Sea Level 16 13 Service Distance Spacing 10-40569 Pin 16 18 10 Rating DC AC (RMS) Nom. Nom. 16 Short 20 7.5 10-597107-161 Socket Inst. 250 200 1/16 22 5 A 700 500 1/8 1/16 16 13 10-40599 Pin 18 10 D 1250 900 3/16 1/8 16 Long 16 20 7.5 10-597107-171 Socket E 1750 1250 1/4 3/16 22 5 B 2450 1750 5/16 1/4 10-33646 Pin 12 23 12 12 C 4200 3000 1 5/16 14 17 10-597107-131 Socket * The values listed in Table I represent operating values which include a 10-35531 Pin generous safety factor. It may be necessary for some applications to 8 46 88 exceed the operating voltages listed here. If this is necessary, designers 10 33 will find Table II useful for determining the degree to which the recom- 10-35532 Socket mended values of Table I can be exceeded. 10-35529 Pin 4 80 44 6 60 10-35530 Socket 10-35527 Pin 0 150 00 1 125 10-35528 Socket 2 100 * Solder Wells Filled ** Contact ratings as stated are test ratings only. The connector could not with- stand full rated current through all contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designers hands as he can best determine which peak volt- age, switching surges, transients, etc. can be expected in a particular circuit. The 10SL, 12S, 14S and 16S connectors require short contacts. TABLE II ALTITUDE VOLTAGE DERATING** CHART Nominal Standard Sea Pressure Altitude Pressure Altitude Distance Level Conditions 50,000 Feet 70,000 Feet Minimum Minimum Minimum Test MS Flashover Test Flashover Test Flashover Voltage Service Airspace Creepage Voltage Voltage Voltage Voltage Voltage Rating AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS) Inst. 1/32 1/16 1400 1000 500 400 325 260 A 1/16 1/8 2800 2000 800 600 450 360 D 1/8 3/16 3600 2800 900 675 500 400 E 3/16 1/4 4500 3500 1000 750 550 440 B 1/4 5/16 5700 4500 1100 825 600 480 C 5/16 1 8500 7000 1300 975 700 560 Not corrected for changes in density due to variations in temperature. ** No attempt has been made to recommend operating voltages. The designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for cir- cuit transients, surges, etc. 67MS/Standard crimp contacts Machined from copper alloy and silver-plated for maximum corrosion resistance, with a minimum millivolt drop and a maximum current carrying capacity, the size 16 and 12 socket contacts are of the closed entry design. Crimp contacts are available for all MS insert arrangements and are identified with an Amphenol proprietary number. MS/STANDARD CRIMP CONTACTS TABLE I CONTACT ARRANGEMENT SERVICE RATING Mating Wire Allowable Required Test Part Pin/ End Barrel Wire Wire Adapter Current** Recommended Number Socket Size Size Size Sleeve Amps Effective Operating Voltage* MS Creepage Mechanical at Sea Level 10-40553 Pin 16 13 Service Distance Spacing 16 18 10 Rating DC AC (RMS) Nom. Nom. 16 10-40552 or Short 20 7.5 Inst. 250 200 1/16 10-597109-161 Socket 22* 10-74696-6 5 A 700 500 1/8 1/16 10-40557 Pin 16 13 16 18 10 D 1250 900 3/16 1/8 16 10-40556 or Long 20 7.5 E 1750 1250 1/4 3/16 10-597109-171 Socket 22* 10-74696-6 5 B 2450 1750 5/16 1/4 10-40561 Pin 12 23 C 4200 3000 1 5/16 12 12 10-40560 or * The values listed in Table I represent operating values which include a 10-597109-131 Socket 14 17 generous safety factor. It may be necessary for some applications to 10-40792 Pin 8 46 exceed the operating voltages listed here. If this is necessary, designers 88 will find Table II useful for determining the degree to which the recom- 10-40793 Socket 10* 10-74696-1 33 mended values of Table I can be exceeded. 10-40564 Pin 4 80 44 10-40565 Socket 6* 10-74696-2 60 10-40562 or Pin 0 150 10-581806 00 10-40563 or 10-581808 Socket 2* 10-74696-7 100 * When using wire adapter sleeve shown. ** Contact ratings as stated are test ratings only. The connector could not withstand full rated current through all contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designers hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. The 10SL, 12S, 14S and 16S connectors require short contacts. TABLE II ALTITUDE VOLTAGE DERATING** CHART Nominal Standard Sea Pressure Altitude Pressure Altitude Distance Level Conditions 50,000 Feet 70,000 Feet Minimum Minimum Minimum Test MS Flashover Test Flashover Test Flashover Voltage Service Airspace Creepage Voltage Voltage Voltage Voltage Voltage Rating AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS) Inst. 1/32 1/16 1400 1000 500 400 325 260 A 1/16 1/8 2800 2000 800 600 450 360 D 1/8 3/16 3600 2800 900 675 500 400 E 3/16 1/4 4500 3500 1000 750 550 440 B 1/4 5/16 5700 4500 1100 825 600 480 C 5/16 1 8500 7000 1300 975 700 560 Not corrected for changes in density due to variations in temperature. ** No attempt has been made to recommend operating voltages. The designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc. 68