AS6200-AWLT-S ams

AS6200 Temperature Sensor The AS6200 IC is a high accuracy temperature sensor system General Description that communicates via a 2 wire digital bus with other devices. It consists of a Si bandgap temperature sensor, an ADC and a digital signal processor. It has a very high temperature accuracy (0.4C for AS6200) and an ultra-low power consumption (low operation and quiescent current) which makes it ideally suited for mobile/battery powered applications. The AS6200 is an easy to integrate and use solution, featuring an factory calibrated sensor, integrated linearization and the possibility to use 2 different IC addresses, enabling to use two AS6200 devices on one bus. Additionally the AS6200 temperature sensor system also features an alert functionality, which triggers e.g. an interrupt to protect devices from excessive temperatures. Ordering Information and Content Guide appear at end of datasheet. Key Benefits & Features The benefits and features of AS6200, Temperature Sensor are listed below: Figure 1: Added Value of Using AS6200 Benefits Features 0.4C (0C to 65C) High Measurement Accuracy 1C (-40C to 125C) (max. values) 6 A Operation (typ. 4 Hz) Low Power Consumption 0.1 A Standby (typ.) Supply Voltage Range 1.8V to 3.6 V Wide Operating Temperature -40C to 125C Small PCB Footprint 1.6 mm x 1.0 mm (WLCSP) ams Datasheet Page 1 v1-01 2016-Jun-17 Document FeedbackAS62 00 Gene ral Des c rip t ion Applications HVAC and thermostat controls Medical instrumentation Body temperature measurement Mobile devices Thermal monitoring for smartphones, tablets and cameras Smart watches and wearables Industrial Industrial automation Cold chain monitoring Figure 2: Typical Application Environment of the AS6200 Temperature Sensor VDD R PU Pull-up resistors Slave SDA SCL Micro- VDD VDD VSS controller (Bus Master) 10nF ADD0 ALERT Address Select In Figure 2 a typical application of the AS6200 is shown. It is connected via a serial bus (IC) with a microcontroller. The sensor system is also connected to the microcontroller via the Alert pin which can be used to trigger events in case the temperature exceeds defined limits. Page 2 ams Datasheet Document Feedback v1-01 2016-Jun-17 Serial Interrupt Interface AS6200