03-Serie TL-A 03-Serie TL-A 21/11/12 11:56 Page6 TL series Tiny washable toggle switches Distinctive features and specifications Process sealed Single piece case O-ring seal between actuator and bushing Epoxy sealed terminals A Wide variety of contact materials Same PCB layout as TP, TR and TG tiny switches ELECTRICAL SPECIFICATIONS MATERIALS Max. current/voltage rating with resistive load : Case : PBT - gold plated contacts : 0,4VA 20V max. AC or DC Actuator : brass, nickel plated - silver plated contacts : 0,5A 48V max. AC or DC Contacts and terminals : Minimum load : 10mA 50mV - 10A 5VDC 0 : brass, gold plated Contact resistance : 20 m max. 1 : brass, silver plated Insulation resistance : 1.000 M min. at 500VDC 3 : brass, gold plated (1,27 Dielectric strength : micron gold) 1.000 Vrms 50 Hz min. between terminals and frame 8 : contact brass, gold plated 500 Vrms 50 Hz min. between terminals + tin plated terminals Electrical life at full load : 9 : contact brass, gold plated (1,27 micron gold) + tin plated Contacts Number of cycles terminals 2 positions 3 positions Terminal seal : epoxy Gold plated 60.000 30.000 Silver plated 20.000 10.000 GENERAL SPECIFICATIONS Strength of terminals : pull-out force - 10N max. Operating temperature : -30C to +85C Moisture : 21 days 95 % (NFC 20-603 - IEC 68-2-3) Cleaning : solvents or water + detergent Wave soldering : 260C - 5 sec. A-6 www.apem.com APEM 03-Serie TL-A 03-Serie TL-A 21/11/12 11:56 Page7 TL series Tiny washable toggle switches Overview TL SERIES Number of poles Electrical functions Terminals 3 Single pole 6 ON - ON P0 Straight PC A 4 Double pole 9 ON OFF ON Y0 Bracket mounting 7 MOM OFF MOM W0 Right angle, horizontal mounting 8 ON OFF MOM WW Right angle, vertical mounting 2 ON - MOM MW Wire-wrap Contact and terminal Lever and case styles Special options materials Lever styles : 00 No special requirement 0 Brass, gold plated 07 Trimmed terminals - length 3,2 (.125) Short - standard 1 Brass, silver plated 08 Extended terminals Medium 3 Brass, gold plated 18 Switch without ground plate Long (1,27 micron gold) 20 Ground plate with 2 pins Cylindrical 8 Contact brass, gold 25 Trimmed terminals - length 5 (.196) plated + tin plated Codes according to lever 30 Wire-wrap on bracket mounting models terminals finish and case colours : see 50 Crimped ground plate pins 9 Contact brass, gold option pages. plated (1,27 micron gold) + tin plated Insulated levers available. terminals (SP only) ABOUT THIS SERIES On the following pages, you will find successively : - model structure of switches - options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Packaging unit : 100 pieces, except for models with WW terminals (50 pieces) APEM www.apem.com A-7