High Current/High Voltage Resin Sealed Filters High current filters are ideal for use in high current 5 volt logic buss, but also can be used for 48 VDC telephone rack buss, high current switch mode power supplies and DC charging systems. High voltage filters find use in high voltage power supplies and applications requiring U.L. Hi-Pot. Installation Notes for Figure 1 & 2 see below (Figure 3 see page CF6) Features 1. Mounting installation torque Current ratings up to 100 Amps Method A: Mounting in full threaded through-hole Maximum torque: 96 in-lbs Continuous voltage ratings up to 1250 VDC/240 VAC (400Hz) Method B: Mounting w/hardware Maximum torque: 84 in-lbs U.L. 1459 recognized and CSA C22.2 approved versions available 2. Terminal installation torque Maximum torque: 20 in-lbs Rugged bolt-in style for easy installation Note: Use two-wrench method to install terminal hardware 1-1/2 Imperfect Thds. 5/1624 Unf2A Thd250 (6.35) .060 Max., Typ062 .005 .815 (1.58 .13) ( Typ. Hex250 (6.35) Min250 .250 (6.35) (6.35) Min. Typ500 250 (12.7) (6.35) .563 Hex. ( Figure 3 Dimensions in inches (mm) API TECHNOLOGIES 8061 Avonia Rd. Fairview, PA 16415 Ph: 814-474-1571 Fax: 814-474-3110 eis.apitech.com LP24 API TECHNOLOGIES SPECTRUM CONTROL GmbH Hansastrasse 6 91126 Schwabach, Germany Phone: (49)-9122-795-0 Fax: (49)-9122-795-58High Current/High Voltage Resin Sealed Filters High Current High Voltage Feed-through 1.250 .031 1.000 .031 .375 (31.8 .79) (25.4 .79) (9.53) .312 (7.93) .250 Flats .051 .005 ( 1.30 .13) .327 Max578 Max. (8.30 Max.) (14.68 Max.) Mounting Surface 5/1624 Unf2A .937 .031 .689 .031 (17.5 .79) (23.8 79) Figure 4 .500 (12.7) .325 (8.26) .057 .005 ( 1.45 .13) .075 (1.91) .990 .031 .740 .031 (25.15 .79) (18.61 .79) 3/832unef2A Thd. Mounting Surface .375 .500 (9.53) (12.70) Figure 5 .020 .125 (.51) (3.18) 3/832 Unef2A Thd. Figure 6 Dimensions in inches (mm) Rated Voltage Minimum Insertion Loss (dB) 125C I Min 10 1 3 10 30 100 300 1 Part Number Figure DC AC*** Amp CKT Cap GHz MHz MHz MHz MHz MHz MHz GHz 1 60 50 0.22 F 30 40 50 50 50 50 50 54-848-005* C 20 54-853-001* 2 60 50 C 0.22 F 20 30 40 50 50 50 50 50 54-853-004 2 200 140 100 C 0.22 F 20 30 40 50 50 50 50 50 1 200 140 100 C 0.22 F 20 30 40 50 50 50 50 50 54-848-008 54-844-001** 3 600 240 25 C 4700 pF 20% 12 20 30 33 50 50 3 600 240 25 0.01 F 20% 7 20 25 35 40 57 57 54-844-002** C 3 54-763-008 4 750 25 C 1000 pF 10 20 28 28 28 54-763-009 4 750 25 C 4000 pF 10 22 32 35 35 40 5 1250 25 C 4000 pF 6 20 30 35 35 35 54-789-003 1280-060 6 2500 25 Pi 1500 pF 5 15 50 50 50 50 Also available through APIs authorized distributors. Also available through APIs authorized European distributors/agents. * Denotes parts that are UL recognized to UL 60950 and certified to CSA C22.2 ** Denotes parts that meet 1500 VAC Dielectric Withstanding Voltage per UL 1283 and CSA C22.2 *** AC Voltage to be 400Hz API TECHNOLOGIES 8061 Avonia Rd. Fairview, PA 16415 Ph: 814-474-1571 Fax: 814-474-3110 eis.apitech.com LP25 API TECHNOLOGIES SPECTRUM CONTROL GmbH Hansastrasse 6 91126 Schwabach, Germany Phone: (49)-9122-795-0 Fax: (49)-9122-795-58