SMB18FA Banner

Accessory Mounting Brackets Mounting Brackets for Photoelectric Sensors Mounting Brackets Dimensions Model Used With Features (all measurements in mm) Barrel Mount SMB12FA 64.5 (3/8 - 16 x 2 bolt) Swivel bracket with tilt and pan movement for precision adjustment 68.7 M12 Easy sensor mounting to extruded rail 32.4 A MINI-BEAM 2 T-slots B Metric and inch size bolts available SMB12FAM10 12 mm sensor mounting hole (M10 - 1.5 x 50 bolt) A = Bolt thread by model B Hole size: = 12.1 QS18 Barrel Mount MINI-BEAM S18/M18/T18 S18U QS18U Q45UR M18C2 Q45UR S18C2 SMB18FA T18U (3/8 - 16 x 2 bolt) T-GAGE M18T 66.4 EZ-LIGHT M18 EZ-LIGHT T18 25.9 Bracket-to-Bracket Swivel bracket with tilt and pan 68.9 B movement for precision adjustment SMBQS18A Easy sensor mounting to extruded rail SMBQS18Y T-slots A SMBQS18YL Metric and inch size bolts available SMB4050YL 18 mm sensor mounting hole A = Bolt thread by model Base Mount B Hole size: = 18.1 SMB18FAM10 (M10 - 1.5 x 50 bolt) Q25 QS18 Universal Voltage WARNING . Not To Be Used for Personnel Protection Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection. Printed in USA 04/10 P/N 143737 rev. BAccessory Mounting Brackets Barrel Mount 51 44 SMB18AFA 32 (3/8 - 16 x 2 bolt) 51 Protective, swivel bracket with tilt and pan movement for precision adjustment T18 68.9 B Easy sensor mounting to extruded A QS18 rail T-slots Metric and inch size bolts available Mounting hole for 18 mm sensors SMB18AFAM10 A = Bolt thread by model (M10 - 1.5 x 50 bolt) B Hole size: = 18.1 51 50 SMB18ATFA (3/8 - 16 x 2 bolt) 115 Protective, swivel bracket with tilt and B pan movement for precision adjustment 32 QS18 Easy sensor mounting to extruded (AC/DC Models) rail T-slots 68.9 Metric and inch size bolts available A Mounting hole for 18 mm sensors SMB18ATFAM10 (M10 - 1.5 x 50 bolt) A = Bolt thread by model B Hole size: = 18.1 Barrel Mount QS30 SM30/SMI30 S30 T30 SMB30FA T30U (3/8 - 16 x 2 bolt) EZ-LIGHT T30 83.2 36.3 68.9 Swivel bracket with tilt and pan B movement for precision adjustment Base Mount Easy sensor mounting to extruded rail A T-slots Q40 Metric and inch size bolts available Q45 30 mm sensor mounting hole Q45U A = Bolt thread by model Q45UR B QT50U Hole size: = 30.1 OMNI-BEAM OTB/LTB SMB30FAM10 VTB (M10 - 1.5 x 50 bolt) STB K50 QT50R EZ-LIGHT K50L Banner Engineering Corp. Minneapolis, MN U.S.A www.bannerengineering.com Tel: 763.544.3164 2 P/N 143737 rev. B