Free 24-hour t ech support: 724-746-5500 blackbox.com 2010. All rights reserved. Black Box Corporation. DIN Rail RS-232/RS-485Fiber Driver Put your industrial communications on the right track with this convenient DIN rail fiber driver. 06/03/2010 1 of 2 26670Put your industrial communications on the right track with this DIN rail solution DB9 Male/Female Serial Mouse Extension Features Cable (BC00200) Time Clocks Enables any two async serial devices to communicate half- or full-duplex over Individually Shielded Remote Site Low-Capacitance Individually Shielded Workstation Up to 4000 feet away two multimode ST fibers at distances Fiber Optic Cable Cable (ERN24A) Low-Capacitance Cable (ERN24A) 2.5 miles (4 km) up to 2.5 miles (4 km). RS-232 signals are supported up to 115.2 kbps RS-422 or RS-485 signals are supported up to 460.8 kbps. Replaces converters and isolators when you connect remote equipment. RS-422/ DIN Rail DIN Rail RS-232/ RS-485 RS-232/ DIN Rail RS-485 RS-485 Fiber Driver Repeater DIN Rail Fiber Driver DIN Rail RS-232RS-422/ with Opto- (MED100A) (MED100A) Individually 12-VDC 12-VDC RS-485 DIN Rail Shielded Isolation Power Power Converter with (ICD102A) Low-Capacitance Supply Supply Opto-Isolation Cable (ERN24A) (PSD100) (PSD100) (ICD100A) Conveyor Belt Individually Shielded Time Clock Low-Capacitance Cable (ERN24A) Scale technically speaking DIN rail usage. Tech SPec S DIN rail is an industry-standard metal rail, usually installed Distance (Maximum) 2.5 mi. (4 km) inside an electrical enclosure, which serves as a mount for Operation RS-232: Half- or full-duplex small electrical devices specially designed for use with DIN RS-485: 2-wire half-duplex or 4-wire full-duplex RS-422: Full-duplex rails. These devices snap right onto the rails, sometimes Fiber ring: Half-duplex over multimode all transmissions are async requiring a set screw, and are then wired together. Speed RS-232: Up to 115.2 kbps Different devices are available for mounting on DIN rails: RS-422/RS-485: Up to 460.8 kbps CE Approval Yes terminal blocks, interface converters, media converters, Connectors (2) 6-position terminal blocks, (1) pair of ST switches, repeaters, surge protectors, or PLCs, to name a few. Operating Environment Temperature: -40 to +176F (-40 to +80C) Humidity: Up to 95% noncondensing DIN rails are a space-saving way to accommodate Power 1030 VDC, 140 mA components. And because DIN rail devices are so easy to install, Size 1 H x 2.3 W x 4.3 D (2.5 x 5.8 x 10.9 cm) replace, maintain, and inspect, this is an exceptionally convenient system that has become very popular in recent years. A standard DIN rail is 35 millimeters wide with raised-lip edges, its dimensions outlined by the Deutsche Institut fr Normung, a German standardization body. Rails are generally Item Code available in aluminum or steel and may be cut for installation. DIN Rail RS-232/RS-485Fiber Driver MeD100a Depending on the requirements of the mounted components, You may also need DIN Rail, 1-m (3.2-ft.) Dr100 the rail may need to be grounded. DB25 to Terminal Block Adapter IC980 to power four fiber drivers, order DIN Rail 12-VDC Power Supply PsD100 06/03/2010 724-746-5500 blackbox.com 2 of 2 26670 BLACK BOX