CleO35 Module Datasheet Version 1.0 Document Reference No.: FT 001299 C learance No.: FTDI 493 Future Technology Devices International Limited Datasheet CleO35 Module 1.1 Features 1 Introduction The CleO35 utilises the FTDI FT903 low power MCU to The CleO35 is a smart TFT display shield for bridge between the Arduino and fast interface Arduino. It includes a 3.5 inch 320x480 pixel TFT accessories such as camera and SD Card input. For a LCD panel with resistive touch, PWM audio output full list of the FT903s features please see the FT90X with in-built speaker amplifier for better audio datasheet .In addition, the CleO35 has the following quality features: Landscape and portrait modes supported These smart TFT display shields can be easily In built FTDI FT810 embedded video engine programmed by almost anyone to give (EVE) graphic controller professional looking HMI / GUI s with no prior knowledge of complex graphics programming or Anti-Aliased graphics throughout for much finer mathematics. image quality with nojaggie. Ready to use LCD module with resistive touch in panel mountable bezel. Micro SD card socket support. In built 8M Byte Eflash memory USB DFU port for firmware updates Support camera interface PWM audio supported and in built speaker amplifier Designed as Arduino and NerO shield Compatible with FTDI CleO-RIO, CleO-Camera and CleO-Speaker. CE and FCC certified Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, C enturion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered C ompany Number: SC 136640 Copyright Future Technology Devices International Limited 1 CleO35 Module Datasheet Version 1.0 Document Reference No.: FT 001299 C learance No.: FTDI 493 2 Ordering Information Part No. Description CleO35 module, with FPC/FFC 50 LCD connector, 3.5 inch TFT LCD display CleO35A panel preinstalled, with resistive touch. Black bezel. CleO-RIO1 Arduino Shield for users to stack Arduino board on bottom of CleO35. CleO-CAM1 A camera plug-in module for CleO35. CleO-SPK1 A speaker enclosure with connecting wires to CleO35. 3 Program Support The demo applications are provided for CleO35 modules by FTDI. Visit FTDIs website at