Photoelectrics Diffuse-reflective, Relay Output Type PMD Range: 800 mm Modulated, infrared light Make or break switching function (switch selectable) LED-indication for target detected Multi supply voltage: 12 to 240 VDC and 24 to 240 VAC, 50/60 Hz 25 x 65 x 81 mm reinforced PC housing, IP 67 Timer options (adjustable) NO and NC output Product De scription Ordering Key PMD8R G T Diffuse-reflective photo e - tion. 25 x 65 x 81 mm plastic Type lec tric switch. Range up to housing. PG 13 or 1/2 NPT Cable gland 0.8 m. Adjustable sensitivity. cable gland. Timer op tions: Option: Timer function Im-mune to am bient light. Delay on oper ate, delay on Out put function switch select- release, one shot (trig gered able. Protection degree IP on lead-ing or trail ing edge). 67. Screw terminal connec - Type Selection Housing Ordering no. Ordering no. W x H x D without timer with timer 25 x 65 x 81 PG 13.5 cable gland PMD 8R G PMD 8R GT 1/2 NPT cable gland PMD 8R I PMD 8R IT Specifications Rated operating dist. (S ) 800 mm Optical angle n (0 to 5,000 lux) Reference target: (200 x 200 mm test card) 12 Kodak test card R27, Operating frequency 20 Hz white, 90% reflectivity, Response time 200 x 200 mm OFF-ON ( t ) 20 ms ON Rated operational volt. (U ) 10.8 to 264 VDC B ON-OFF ( t ) 30 ms OFF AC: 45 to 65 Hz 21.6 to 264 VAC Power ON delay (t ) 300 ms (typ. 100 ms) v Rated operational power Output function Switch selectable, make or (relay ON) 2 W (2.5 VA) break switching Output Indication Contact ratings (AgCdO) (micro gap) Target detected LED, yellow Resistive loads AC 1 3 A/250 VAC Optional timer DC 1 3 A/30 VDC Delay on operate 0.1 to 7 s 2 s Small inductive loads AC 15 2 A/250 VAC Delay on release 0.1 to 7 s 2 s DC 13 3 A/30 VDC 6 One shot 0.1 to 7 s 2 s Mechanical life (typical) 40 x 10 operations 5 Electrical life (typical) 5 x 10 operations Environment at 220 VAC - 3 A resistive Overvoltage category III (IEC 60664/60664A load: 360 impulses/h 60947-1) Pollution degree 3 (IEC 60664/60664A Dielectric voltage 2000 VAC (rms) (cont./supply) 60947-1) Sensing range (S ) 0.2 - 0.8 m d Degree of protection IP 67 (IEC 60529 60947-1) Light source GaAlAs, LED, 880 nm Temperature Light type Infrared, modulated Operating -25 to +55C (-13 to +131F) Storage -30to +80C (-22 to +176F) Specifications are subject to change without notice (02.03.2006) 1 PMD Specifications (cont.) Selection of Function Switch Vibration 10 to 150 Hz, 0.5 mm/7.5 g 1 2 3 (IEC 60068-2-6) PMD 8R . 1 Break switching Shock 2 x 1 m & 100 x 0.5 m (IEC 60068-2-32) 2 Make switching Rated insulation voltage 250 VAC (rms) Housing material Body PC/ABS, grey, reinforced 3 Delay on operate - PMD 8R .T Front PC, black Break switching Cover PC, black 4 Delay on operate - Cable gland PA, black, reinforced Make switching Mounting bracket Steel, galvanized 5 Delay on release - Connection 2 Break switching Screw terminal 5 x 2 x 1 mm Cable gland PG 13.5 or 1/2 NPT 6 Delay on release - for cable 6 to 10 mm Make switching Weight 110 g 7 One shot, trailing edge - Approvals UL, CSA Break switching CE-marking Yes 8 One shot, trailing edge - Make switching 9 One shot, leading edge - Connection Diagram Break switching 10 One shot, leading edge - Time adjustment Make switching (optional) Sensitivity Dont care adjustment Upper postion ON (Mode 1) Lower position OFF (Mode 0) Reduction Factors LED Reduction factors photoelectric switches DIP switches Note: Real sensing distance = rated operating distance (S ) n 12 - 240 VDC x reduction factor 24 - 240 VAC Kodak test card, white, 50/60 Hz type R 27, 90% reflectivity 1.0 Dead black cardboard 0.1 - 0.4 Kodak test card, grey, type R 27 0.41 - 0.45 30 VDC White Styropack 1.0 - 1.2 250 VAC Bright metal 1.2 - 2.0 Max. 3 A White cotton 0.5 - 0.8 Grey PVC 0.4 - 0.8 Raw wood 0.4 - 0.8 ER 1, reflector 0.3 Delivery Contents Truth Table Photoelectric switch: PMD 8R Make switching Break switching Cable gland Installation instruction Object present No Yes No Yes Mounting bracket Packaging: Corrugated cardboard (environmentally LED OFF ON OFF ON friendly recycling material) Load Non- Active Active Non- active active Accessories MB02 (longer mounting bracket), please refer to Accessories 2 Specifications are subject to change without notice (02.03.2006)