Low VF Low IR SMD Schottky Barrier Rectifiers ACDBA260LR-HF Reverse Voltage: 60 Volts Forward Current: 2.0 Amp RoHS Device DO-214AC (SMA) Halogen free Features 0.065 (1.65) 0.110 (2.79) 0.049 (1.25) 0.100 (2.54) - High current capability. 0.177 (4.50) - High surge current capability. 0.157 (3.99) - Low reverse current. 0.012 (0.305) 0.006 (0.152) - Comply with AEC-Q101 0.090 (2.29) 0.078 (1.98) Mechanical data 0.008(0.20) 0.060 (1.52) 0.004(0.10) - Case: DO-214AC / SMA, molded plastic. 0.030 (0.76) 0.208 (5.28) 0.193 (4.90) - Epoxy: UL flammability classification rate 94V-0 . - Terminals: Lead free plating (Tin finish). Dimensions in inches and (millimeter) -Solderable per MIL-STD-202, Method 208. Circuit diagram - Polarity: Indicated by cathode band. - Weight: 0.062 grams(approx.). Maximum Ratings (at TA=25C unless otherwise noted) Symbol Parameter Conditions MIN. TYP. MAX. Unit Repetitive peak reverse voltage VRRM 60 V DC blocking voltage VDC 60 V RMS voltage VRMS 42 V Average forward rectified current IF 2 A 8.3ms single half sine-wave superimposed Peak forward surge current IFSM 70 A on rate load (JEDEC method) Operating Temperature range TJ -50 +150 C Storage temperature range TSTG -50 +150 C Electrical Characteristics (at TA=25C unless otherwise noted) Symbol Parameter Conditions MIN. TYP. MAX. Unit Instantaneous forward voltage IF = 2A, TA=25C VF 0.55 V VR = VRRM, TJ=25C IR 0.5 mA Reverse Current VR = VRRM, TJ=100C IR 20 mA Thermal Resistance Junction to case R JC 30 C/W Junction capacitance (Note 1) f=1MHZ and applied 4V DC reverse Voltage pF CJ 150 Note: 1. Measured at 1.0MHZ and applied reverse voltage of 4.0V DC. Company reserves the right to improve product design , functions and reliability without notice. REV: A AQW-JL002 Page 1 Comchip Technology CO., LTD.Low VF Low IR SMD Schottky Barrier Rectifiers Rating and Characteristics Curvers (ACDBA260LR-HF) Fig.1 - Typical Forward Current Fig.2 - Typical Forward Characteristics Derating Curve 3.0 100 2.5 10 2.0 1.0 1.5 1.0 0.1 0.5 TJ=25C Pulse Width 300us 1% Duty Cycle 0.01 0 75 0 25 50 100 125 150 175 0.3 0.4 0.5 0.6 0.7 0.8 Case Temperature, (C) Forward Voltage, (V) Fig.3 - Maximum Non-repetitive Fig.4 - Typical Reverse Characteristics Forward Surge Current 100 100 TJ=25C 8.3ms single half sine wave, JEDEC method 80 10 60 TJ=100 C 1.0 40 0.1 20 0.01 TJ=25 C 0 0.001 1 10 100 20 40 60 80 100 Number of Cycles at 60Hz Percent of Rated Peak Reverse Voltage, (%) Fig.5 - Typical Junction Capacitance 500 400 300 200 100 0 0 1 10 100 Reverse Voltage, (V) Company reserves the right to improve product design , functions and reliability without notice. REV: A AQW-JL002 Page 2 Comchip Technology CO., LTD. Junction Capacitance, (pF) Peak Forward Surge Current, (A) Average Forward Current, (A) Reverse Leakage Current, (mA) Instantaneous Forward Current, (A)