APPROVAL FREIGABE DEBLOCAGE AUTORIZACION F E D C B A b NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265C FOR 8 SEC. AND SOLDER PREHEAT 150C FOR 180 SEC.) 2. IP RATING: IP 67 ( 5 : 1 ) 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE D D 4. METALSHELL: ZINC DIE CAST min. 50in NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. SEALING COMPOUND: EPOXY RESIN UL 94 V-0 BLACK 8. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30in HARD GOLD over min. 50in NICKEL o PLEASE ADD 3 for 8in HARD GOLD over min. 50in NICKEL 9. REAR SPACER CLIPS: COPPER ALLOY b min. 200in TIN over 80in NICKEL PCB-HOLE: n3,1 0,1 PCB THICKNESS 1,6mm 10. HEXLOCKING SCREWS: STAINLESS STEEL 11. PCB-HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 12. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 13. CONNECTOR IS PART MARKED: 15-00048 o CONEC ABC +0,02 8 - 0,23 0,3 + b 78 - 0 63,5 0,13 C C +0 54,96 - 0,25 0,05 (37x) 0,64 b n SEALING COMPOUND B B O-RING 15-00048 o CONEC ABC 4-40 UNC SEE NOTE 13 SW 4,8 4-40 UNC b AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. APPROVAL FREIGABE DEBLOCAGE AUTORIZACION APPROVAL scale: 2:1 (5:1) tolerance CUSTOMER APPROVAL DATE: material: see notes dim. in mm A A date name title: drawn 17.10.08 Petker D-SUB FEMALE NAME: TITLE: appd. 21.10.08 Fischer 37pos. SOLDER PIN STRAIGHT norm with rear spacer clip and hexlocking screw dwg no: d-old Inventor 10 DIN- COMPANY NAME: 5 x b 3435 23.09.09 HS A3 R 15K1A309 aOrigin sh: 1 APPROVAL FREIGABE DEBLOCAGE AUTORIZACION APPROVAL rev. description date name part no: 15-00048 o (see note 8) F E D C B A 10 APPROVAL FREIGABE DEBLOCAGE AUTORIZACION 0,3 + 21,1 - 0 THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND +0,4 11,93 - 0,3 +0,4 11,5 - 0,3 +0,17 +0,4 6,13 8,6 - - 0,08 0,3 +0,25 3,6 - 0 4,6 9,4APPROVAL FREIGABE DEBLOCAGE AUTORIZACION R3,4 0,13 F E D C B A P.C.B. HOLE DRILLINGS 63,5 0,13 0,1 24,84 D D 0,1 22,1 0,1 19,33 0,1 16,56 0,1 13,82 0,1 11,05 0,1 8,28 5,54 0,1 0,1 + (37x) n1 0,1 - 2,77 0 1 C C 3,1 0,1 (2x) n 1,4 0,1 4,14 0,1 6,91 0,1 9,68 0,1 12,42 0,1 15,19 0,1 17,96 0,1 20,7 0,1 23,47 0,1 B B RECOMMENDED PANEL CUT-OUT 59,1 0,1 i 0,26 A B 0,26 i B 63,5 0,1 A APPROVAL FREIGABE DEBLOCAGE AUTORIZACION APPROVAL scale: 3:1 tolerance CUSTOMER APPROVAL DATE: material: see sheet 1 dim. in mm A A date name title: drawn 17.10.08 Petker P.C.B. HOLE DRILLINGS NAME: TITLE: appd. 21.10.08 Fischer PANEL CUT-OUT norm D-SUB Female 37pos. Solder pin straight dwg no: d-old Inventor 10 DIN- COMPANY NAME: A3 R 15K1A309 aOrigin sh: 2 APPROVAL FREIGABE DEBLOCAGE AUTORIZACION APPROVAL rev. description date name part no: see sheet 1 F E D C B A 1 10 APPROVAL FREIGABE DEBLOCAGE AUTORIZACION 3,1 0,05 (2x) n THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND 1,42 0,1 2,84 0,1 11,4 0,1