9270-05-00TR

9270 SERIES -40C TO 125C SURFACE MOUNT REED RELAYS 9270 Series Surface Mount Reed Relays for -40C to 125C Operation Based on the popular 9290 SMD Relay, the 9270 Series offers stable operation from -40C up to 125C. The 9270 is ideally suited for high temperature applications in the Wide Operating Range Automated Test Equipment, Instrumentation and Telecom markets where wide range -40C to +125C temperal testing is required. 9270 Series Features u Stable operation from -40 to 125C .670 (17.01) 12 13 .020 (5.08) u High Insulation Resistance - 10 minimum (10 typical) Indicates Pin 1 side 9290-XX-XX u High reliability, hermetically sealed contacts for long life CO TO DATE CODE u Minimum Footprint .140 Sq. (3.5mm Sq.) Metal Cover u 50 Co-axial Shield for RF and Fast Rise Time Pulse switching u External Magnetic Shield u Tape & Reel available u RoHS compliant .670 (17.01) .020 (5.08) Indicates Pin 1 side 9290-XX-XX CO TO DATE CODE Metal Cover DIMENSIONS in Inches (Millimeters) .176 MAX (4.4) .020 .670 (17.01) L .193 Max. 2 C Indicates Pin 1 side .010 (0.254) (0.51) Gull Wing (4.9) .020 GAP .020 (0.51) (.508 ) Indicates Pin 1 side Pin 1 .800 .012 .176 MAX240 .050 .012 (4.4 ) (20.32 .304) 0 - 7 MAX (6.10) (1.27 .304) .020 Metal Cover (Magnetic Shield) .018 (.508 ) (.457 ) .050 TYP 750 (19.04) MAX. (1.27) Top View .900 (22.86) .176 MAX .208 (4.4) 2 .020 .670 (17.01) J-Lead (5.28) L C Indicates Pin 1 side (0.51) .020 GAP .050R .020 (0.51) (.508 ) Indicates Pin 1 side (1.27) Pin 1 45 .176 MAX240 .600 (15.24) (4.4 ) (6.10) .720 (18.28) .020 Metal Cover (Magnetic Shield) .018 (.508 ) (.457 ) .050 TYP 750 (19.04) MAX. (1.27) .900 (22.86) End View .670 With Co ver 6 LEAD SMD .050 ON CENTER (17.01) .750 ON CENTER OF GULL WING .015 RAD. PADS WITH CO VER (.381 ) .193 Max004 .004/-.000 1 2 (4.9 ) + (.101 .101/-.000) 3 4 5 6 0-7 MAX .050 .012 .800 .012 (1.2 7. 304) (20.32 .304) Ordering Information 9270-XX-XX* .670 With Co ver Coil Voltage Lead Style 6 LEAD SMD .050 ON CENTER (17.01) .750 ON CENTER OF GULL WING .015 RAD. PADS WITH CO VER 05=5 volts 00 = Gull Wing (.381 ) .193 Max004 .004/-.000 12=12 volts 20 = J- Lead 1 2 (4.9 ) (.101 .101/-.000) + 3 4 *Add sufx TR for Tape & Reel 5 6 0-7 MAX 06262014 .050 .012 .800 .012 (1.2 7. 304) (20.32 .304) (401) 943.2686 9270 MODEL NUMBER Parameters Test Conditions Units 1 Form A 50 Coaxial COIL SPECS. Nom. Coil Voltage VDC 5 12 Max. Coil Voltage VDC 6.5 15.0 Coil Resistance +/- 10%, 25 C 100 400 Operate Voltage Must Operate by VDC - Max. 2.5 6.7 Release Voltage Must Release by VDC - Min. 0.4 1.0 CONTACT RATINGS Switching Voltage Max DC/Peak AC Resist. Volts 200 Switching Current Max DC/Peak AC Resist. Amps 0.5 Carry Current Max DC/Peak AC Resist. Amps 1.5 Contact Rating Max DC/Peak AC Resist. Watts 10 1 6 Life Expectancy-Typical Signal Level 1.0V, 10mA x 10 Ops. 1000 Static Contact 50mV, 10mA 0.150 Resistance (max. init.) Dynamic Contact 0.5V, 50mA 0.200 Resistance (max. init.) at 100 Hz, 1.5 msec RELAY SPECIFICATIONS Insulation Resistance Between all Isolated Pins 12 10 (minimum) at 100V, 25C, 40% RH No Shield pF - Capacitance - Typical Shield Floating pF 1.0 Across Open Contacts Shield Guarding pF 0.2 No Shield pF - Open Contact to Coil Shield Floating pF 2.0 Shield Guarding pF 0.4 Contact to Coil Contacts Open, Shield Floating pF 2 Between Contacts VDC/peak AC 250 Dielectric Strength Contacts to Shield VDC/peak AC 500 (minimum) Contacts/Shield to Coil VDC/peak AC 500 Operate Time - including At Nominal Coil Voltage, msec. 0.40 bounce - Typical 30 Hz Square Wave Release Time - Typical msec. 0.10 24 6 To p V i e w : Dot stamped on top of relay refers to pin 1 location Notes: 13 5 1 Consult factory for life expectancy at other switching loads. 2 Surface mount component processing temperature: 500F / 260C max for 1 min- ute dwell time. Temperature measured on leads where lead exits molded package. Environmental Ratings: + + Storage Temp: -40C to 125C Operating Temp: -40C to 125C All electrical parameters measured at 25C unless otherwise specified. Vibration: 20 Gs to 2000 Hz Shock: 50 Gs 06262014 fax (401) 942.0920 www.cotorelay.com COTO TECHNOLOGY, INC.