193-2MS CTS

Series 193 Side Actuated DIP Switch Coplanarity: 0.1mm/.004 maximum Enclosed actuators shield contacts from foreign particles throughout life of switch Integral terminal and contact locked into high temperature plastic base Gold plated contacts for long-term contact corrosion resistance Description The gold plated contact lock-over-center design provides positive detent action for CTS 193 Series. Optimized active contact design incorporates a high contact force, dimple wiping action interface, making it the ideal choice for any network or security system. Ordering Information Series Number of Actuator Actu ato r L eng th B Bottom Seal Package S Shipping Position 193- XX M S R N S RRRTTT T T T T 20212124 1 2 1 E E TTT T T TSS No. of switch Code Spec. Code positions BLANK Ship at OFF position 2 2 positions N Ship at ON position 3 3 positions Code Spec. 4 4 positions M Medium actuator (1.14mm/.045) 5 5 positions 6 6 positions 7 7 positions 8 8 positions 9 9 positions 10 10 positions Code Spec. Blank Anti-static tube packaging Tape and reel packaging R ( Not available for 7 position switch) Notes: Contact CTS for other common features not listed. 2020-10-21 Rev. D www.ctscorp.com Page 1 of 6 2020 CTS Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 193 Side Actuated DIP Switch Electrical Specifications Parameter Conditions & Remarks Min Max Unit Circuit SPST 2 10 positions Initial 50 Contact Resistance milliohms At end of life 100 Insulation Resistance Between insulated terminals 1000 megohms 500 VAC between adjacent Dielectric Strength 1 minute switches Actuation Life 50mA 24 VDC 7,000 cycles Between adjacent closed Switch Capacitance 5.0 pF switches 100 mA Nonswitching Rating or or 50 VDC Mechanical and Environmental Soldering Maximum reflow temperature, 250C for 30 seconds MSL Level 1 RoHS Lead-Free. Fully compliant to RoHS Directive 2011/65/EU Per MIL-STD-202F, method 213B, condition A ( 50Gs) Shock with no contact inconsistencies greater than 1 microsecond Per MIL-STD-202F, method 204D, condition B ( .06 or 15Gs between 10 HZ to 2K HZ) with Vibration no contact inconsistencies greater than 1 microsecond Seal Bottom seal standard Marking Special side or top marking available-consult CTS Packaging: Standard anti-static tube packaging, optional tape & reel packaging Operating Temperature -40C to +85C Range Storage Temperature -40C to +85C Range Soldering Profile 2020-10-21 Rev. D www.ctscorp.com Page 2 of 6 2020 CTS Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.