Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and Static Shielding Bag 1000 Series Static Control Bag ANSI/ESD S11.4 Level 3 This transparent metal-in static shielding bag is designed to provide a static Physical Typical Value Testing Method safe environment for sensitive electronic devices. Bags are printed with an Tensile Strength 4600 PSI, 32 MPa ASTM D882 ESD protective symbol and a lot code for traceability. Open top (1000) and ZipTop (3000) styles are available. The bags are heat sealable. Puncture Resistance 12 lbs, 53 N MIL-STD-3010C Method 2065 SCS Static Shielding Bags 1000 are manufactured from a polyester, metal, Seal Strength 11 lbs, 48 N ASTM D882 polyethylene laminate. The polyester dielectric in concert with the metal layer provides discharge shielding. The exterior being static dissipative allows Thickness 2.8 mils, 0.071 mm +/-10% MIL-STD-3010C Method electrostatic charges to be removed when grounded. 1003 Open Top Bag ZipTop Bag Marking Adhesion Pass IPC-TM-650 2.4.1 Open Top Bag ZipTop Bag Transparency 40% Tobias Electrical Typical Value Testing Method ESD Shielding <10 nJ ANSI/ESD STM11.31 4 11 Surface Resistance - 1 x 10 to < 1 x 10 ohms ANSI/ESD STM11.11 Interior 11 Surface Resistance - < 1 x 10 ohms ANSI/ESD STM11.11 Exterior Static Decay < 2 seconds ETS 406D Cleanliness Typical Value Testing Method Silicone Not Detected FTIR Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset O to 0.250 Tolerance: Width -0, +1/4 Note: Standard bag markings shown above and Seal width +/- 0.125 Heat Sealing Conditions Typical Value Length +/- 1/8 Offset 0 to 1/4 are not to scale. Seal width 3/8 with a tolerance of +/- 1/8 Temperature 300F 375F, 149C 190C Time 0.5 3.5 seconds Pressure 30 70 PSI, 206 482 KPa Bag is free of amines, silicones and heavy metals. This product is intended for commercial use only. This product is not on the Qualified Product Listing under the Defense Standardization Program. RoHS 2, REACH, and Conflict Minerals Statement None of the RoHS 2 restricted materials or REACH substances of very high concern as Made in the of 2017/01/12, or Conflict Minerals are intentionally added in manufacturing this product. Specifications and procedures subject to change without notice. United States of America Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE. See SCS Warranty, Limitation of Liability and Remedies 1000 SERIES STATIC SHIELDING BAG DRAWING DATE 926 JR Industrial Drive, Sanford, NC 27332 WEB SITE: StaticControl.com NUMBER April PHONE (919) 718-0000 2017 1000 Series 2017 DESCO INDUSTRIES INC. Employee Owned