ESD High Temp Polyimide Tape Used in applications masking PCB gold features for wave soldering and IR reflow ovens. Tape is wound on a plastic core ESD protective symbol is marked on the product (located on the core of the roll) per ANSI/ESD S541 Marked with manufacture information per ANSI/ESD S541 for quality control purposes Removal leaves little or no residue Static charge generation during unwind and peel off stainless steel plate application is 5 volts 50% RH 1.0 mil thick (0.001 or 0.0254 mm) Polyimide Film (DuPont Kapton or equivalent) 1.4 mil thick (0.0014 or 0.0356 mm) conductive polysiloxide adhesive 2 5 Adhesive surface resistance 1 x 10 to < 1 x 10 ohms per ANSI/ESD STM11.11 8 11 Film surface resistance 1 x 10 to < 1x 10 ohms per ANSI/ESD STM11.11 Tape is wound on a plastic core. Max Temperature 260C (500F) For best results, apply to board using a rubber roller Wescorp Tape Storage and Limited Warranty: Users shall determine the suitability of the product for its intended use. Width For best results, tape inventory should be continually replenished. It is recommended that rolls of tape be stored flat and rotated (flipped over to Tape 0.25 0.5 0.75 1 Core Length the other side) periodically. Tapes should be stored in a dry, well ventilated ESD High Temp Polyimide 47026 47027 47028 47029 3 36 yd room with a reasonably consistent temperature of 68F (20C) and be protected from exposure to direct sunlight. Tape should not be stored in Width tolerance 1/32 ultraviolet sunlight, moisture, or heat. Tape over one year old should be evaluated by the user to determine acceptability for the users application. Desco Industries, Inc. recommends those tracking useful life of product Tape widths are nominal to use shipping/invoice date as Desco Industries, Inc. expressly warrants metric 0.8 mm (1/32 ). RoHS, REACH, and Conflict Minerals Statement: that for a period of one (1) year from the date of purchase, our Wescorp See RoHS, REACH, and Conflict Minerals Statement Brand ESD Tape will be free of defects in material (parts) and workmanship at Desco.com. 1/4 is 6 mm nominal or 0.236 (labor). See details of Limited Warranty online at Desco.com 1/2 is 12 mm nominal or 0.472 Limited Warranty 3/4 is 18 mm nominal or 0.709 See Descos Limited Warranty at Desco.com 1 is 24 mm nominal or 0.945 *Wescorp is a Desco Industries brand. Specifications and procedures subject to change without notice. Made in Ireland Note: Tape rolls may vary slightly in color Specifications and procedures subject to change without notice WESCORP* ESD HIGH TEMP POLYIMIDE TAPE, PLASTIC CORE PROTEKTIVE PAK DRAWING DATE: 13520 MONTE VISTA AVENUE, CHINO, CA 91710 NUMBER: August PHONE: (909) 627-2578, FAX: (909) 363-7331 2020 WEBSITE: www.ProtektivePak.com 47026 2020 DESCO INDUSTRIES INC. Employee OwnedX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Adhesive Tapes category: Click to view products by Desco manufacturer: Other Similar products are found below : 56-YELLOW-34 X72YD 00-021200-13972-7 021200-64630 60 TAPE (1 ) 62-GRAY-12 X36YD 62-GRAY-1 X36YD 69-1 X36YD 764- 1 x36yd-Red 764-1 x36yd-White 9500PC-3/4 967454-1 1181 19MM X 16,5 METERS 130C-1X15FT E39-RS1-CA 1900-48mm 22- 1/2X36YD 88-SUPER-34X44FT 890103N001 2670 96 EVK-TA-TM047NBH01 20-1 X60YDS 2020-18mmx55m H150 363 3900-Blue 3939-24mmx55m 44-TAN-14 X90YD 4504-34x18 471-Trans-1 x36yd-Bulk 5414 34X36 35-Gray-1/2 4008-12 X36YD 4104-34 x18yd 4116 444-1 x36yd 4466 1 4466W-1/2 x36yd 4492B-12 x72yd 4492B-1 x72yd 4496W-12 x36yd 4508-1 x36yd 4516-3/8x36 4726 1/2 X36YD 054007-43154 054007-43152 06149 11-32-2857 5419 1/2 56 TAPE (1/2 )