INDUSTRIAL SERIAL SERVER DIGI ONE IAP Serial-to-Ethernet connectivity, protocol conversion and protocol interoperability for industrial applications Digi One IAP combines reliable serial-to-Ethernet connectivity Digi One IAP supports a variety of serial and Ethernet with protocol conversion and interoperability. Users can IP protocols, allowing users to bridge serial and Ethernet enable a broad range of serial devices, as well as link two devices, or both. Multi-master access allows multiple masters industrial devices. It is ideal for device management to communicate with a single slave across protocols. Digi applications requiring specific industry protocol support. One IAP converts ASCII data from serial devices to Ethernet protocols. An additional serial port can act as a pass-through Serial server functionality built into Digi One IAP allows port, allowing local devices to communicate with a slave unit any serial device to be connected to a TCP/IP network. without disrupting the serial-to-Ethernet connection. Applications may communicate with the serial device using TCP/UDP or Digis patented RealPort COM port redirector for remote native COM port access. BENEFITS APPLICATION EXAMPLE 1 DB-9 serial port and additional pass-through port TCP/UDP and RealPort for COM/TTY port control and management Ethernet Multi-master/Multi-protocol concurrent support for PLC HMI SYSTEM Allen-Bradley and Modbus protocols Serial and Ethernet protocol bridging support for Allen-Bradley and Modbus protocols promotes DIGI ONE IA interoperability ASCII to protocol translation for Allen-Bradley and Modbus Switch selectable RS-232/422/485 for simple interfacing to any type of serial device Tunable for low latency or optimized throughput RS-232/422/485 RELATED PRODUCTS HMI Modbus Panel RTU Slave DigiOne IA DigiOne DigiOne PostServer Power Supply SP IA TS MEI 76000736 IAP HAZSPECIFICATIONS Digi One IAP FEATURES MANAGEMENT HTTP conguration, Digi Port Authority Remote management diagnostics and auto-discovery tool, SNMP (read/write) Telnet, Reverse Telnet, RFC2217, TCP/UDP Socket Services, PPP, DHCP/RARP, ARP-Ping, Static IP for IP address assignment, PROTOCOLS Support for 64 concurrent socket connections, ASCII, DF1, Modbus RTU/ASCII, Modbus/TCP, EtherNet/IP, Allen-Bradley Ethernet Patented RealPort for COM/TTY ports SOFTWARE SSHv2, SSL, TLS, HTTPS SECURITY AIX, HP-UX, Solaris, Linux, Windows 2000, Windows XP, Windows 7, Windows 8, Windows 8.1, Windows 10, Windows Server 2003, OPERATING SYSTEMS Windows Server 2008, Windows Server 2012. Note: TCP/UDP socket services are operating system independent. STATUS LEDs Serial signals, Power, Ethernet, Diagnostics DIMENSIONS (L x W x D) 4.70 in x 0.90 in x 4.0 in (12.00 cm x 2.30 cm x 10.10 cm) WEIGHT 2.5 oz (64.0 g) OTHER Full modem and hardware flow control, Flash upgradeable firmware, 6 ms serial over Ethernet latency, 35 mm DIN rail mounting INTERFACES SERIAL PORTS 1 RS-232/422/485 (switch selectable) SERIAL CONNECTOR Screw terminal connectors or DB-9M DB-9M can act as a second direct RS-232 port connection when used as the second port SERIAL THROUGHPUT Up to 230 Kbps ETHERNET PHYSICAL LAYER 10/100Base-T POWER REQUIREMENTS POWER INPUT 9-30 VDC 0.5Amps max POWER SUPPLY Removable screw terminal for power (power supply not included) PRODUCT SURGE PROTECTION 2 kV isolation between power supply and serial ground product when used with Digi power supply (ESD) ENVIRONMENTAL OPERATING TEMPERATURE 0 C to 60 C (32 F to 140 F) RELATIVE HUMIDITY 5% to 90% (non-condensing) ETHERNET ISOLATION 1500 VAC min per IEEE 802.3/ANSI X3.263 SERIAL PORT PROTECTION (ESD) 15 kV human body model REGULATORY APPROVALS SAFETY UL 1950, UL 1604 (Class 1, Div. 2), CSA 22.2 No 950, EN60950 EMISSIONS / IMMUNITY FCC Part 15 (Class A), ICES-003 (Class A), CE, AS3548, EN6100-6-2 + EN55024, EN55022 (Class A) PART NUMBERS DESCRIPTION 70001777 Digi One IAP DigiOne IAP - TOP SLAVE MASTER MB SERIAL YES YES YES YES YES YES Ethernet Reset Buttons Power Input MB/TCP YES YES YES YES YES YES (Screw Terminals) 0.9 DF1 YES YES YES YES YES YES DigiOne IAP - BOTTOM A-B ETH YES YES YES YES YES YES 4.7 ENET/IP YES YES YES YES YES YES 4.0 ASC11 NO NO NO NO NO NO Serial Port DB-9M DIP *PCCC encapsulated under CIP only for EtherNet/IP (Screw Terminals) Serial Switches DIGI INTERNATIONAL WORLDWIDE HQ DIGI INTERNATIONAL SINGAPORE DIGI SERVICE AND SUPPORT / You can purchase with confidence knowing that Digi is always available to serve you with expert technical support and our industry 877-912-3444 / 952-912-3444 / www.digi.com +65-6213-5380 leading warranty. For detailed information visit www.digi.com/support. DIGI INTERNATIONAL FRANCE DIGI INTERNATIONAL CHINA 1996-2015 Digi International Inc. All rights reserved. +33-1-55-61-98-98 / www.digi.fr +86-21-50492199 / www.digi.com.cn All trademarks are the property of their respective owners. DIGI INTERNATIONAL JAPAN 91001155 +81-3-5428-0261 / www.digi-intl.co.jp F1/915 MB /RTU MB SERIAL MB/TCP DF1 A-B ETH ENET/IP* ASC11