74LV08A QUADRUPLE 2-INPUT AND GATES Description Pin Assignments The 74LV08A provides provides four independent 2-input AND gates with standard push-pull outputs. The device is designed for operation with a power supply range of 2.0V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using I . The I circuitry disables the OFF OFF output preventing damaging current backflow when the device is powered down. The gates perform the Boolean function: Y = A B or Y = A + B Features Wide Supply Voltage Range from 2.0V to 5.5V Sinks or Sources 12mA at V = 4.5V CC Applications CMOS Low Power Consumption General Purpose Logic IOFF Supports Partial-Power Down Operation Power Down Signal Isolation Inputs or Outputs accept up to 5.5V Wide Array of Products Such As: Inputs Can Be Driven by 3.3V or 5V Allowing for Voltage PCs, networking, Notebooks, Ultrabooks, Netbooks Translation Applications Computer Peripherals, Hard Drives, CD/DVD ROM Schmitt Trigger Action at All Inputs TV, DVD, DVR, set top box ESD Protection Tested per JESD 22 Exceeds 200-V Machine Model (A115) Exceeds 2000-V Human Body Model (A114) Exceeds 1000-V Charged Device Model (C101) Latch-Up Exceeds 100mA per JESD 78, Class I Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See 74LV08A Pin Descriptions Logic Diagram Pin Number Pin Name Description 1 1A Data Input 2 1B Data Input 3 1Y Data Output 4 2A Data Input 5 2B Data Input 6 2Y Data Output 7 GND Ground 8 3Y Data Output 9 3A Data Input 10 3B Data Input 11 4Y Data Output 12 4A Data Input 13 4B Data Input 14 Vcc Supply Voltage Function Table Inputs Output A B Y L X L X L L H H H Absolute Maximum Ratings (Note 5) ( T = +25C, unless otherwise specified.) A Symbol Description Rating Unit ESD HBM Human Body Model ESD Protection 2 kV ESD CDM Charged Device Model ESD Protection 1 kV ESD MM Machine Model ESD Protection 200 V V Supply Voltage Range -0.5 to +7.0 V CC V Input Voltage Range -0.5 to +7.0 V I -20 mA I Input Clamp Current V < 0V IK I -50 mA I Output Clamp Current V <-0V OK O 25 mA I Continuous Output Current -0.5V < V V +0.5V O O CC I Continuous Current Through V 50 mA CC CC I Continuous Current Through GND -50 mA GND T Operating Junction Temperature -40 to +150 C J T Storage Temperature -65 to +150 C STG Total Power Dissipation 500 mW P TOT Note: 5. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 2 of 8 July 2014 74LV08A Diodes Incorporated www.diodes.com Document number: DS35662 Rev. 2 - 2