A Product Line of Diodes Incorporated Green FZT1048A 17.5V NPN MEDIUM POWER HIGH GAIN TRANSISTOR IN SOT223 Features Mechanical Data BV > 17.5V Case: SOT223 CEO BV > 50V Case Material: Molded Plastic. Green Molding Compound CES I = 5A High Continuous Collector Current UL Flammability Rating 94V-0 C I = 20A Peak Pulse Current Moisture Sensitivity: Level 1 per J-STD-020 CM Low Saturation Voltage V <45mV 500mA Terminals: Finish - Matte Tin Plated Leads. CE(sat) R = 50m 5A for a Low Equivalent On-Resistance Solderable per MIL-STD-202, Method 208 SAT h Specified up to 20A for a High Gain Hold-Up Weight: 0.112 grams (Approximate) FE Lead-Free Finish RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Applications Qualified to AEC-Q101 Standards for High Reliability Solenoid, Relay and Actuator Drivers DC Modules Motor Control SOT223 Top View Top View Device Symbol Pin-Out Ordering Information (Note 4) Product Marking Reel size (inches) Tape width (mm) Quantity per reel FZT1048ATA FZT1048A 7 12 1,000 Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See A Product Line of Diodes Incorporated FZT1048A Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V 50 V CBO Collector-Emitter Voltage V 17.5 V CEO Emitter-Base Voltage 7 V V EBO Continuous Collector Current 5 A I C Peak Pulse Current 20 A I CM Base Current I 500 mA B Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit (Note 5) 3.0 (Note 6) 2.0 Power Dissipation P W D (Note 7) 1.6 (Note 8) 1.2 (Note 5) 41.7 (Note 6) 62.5 Thermal Resistance, Junction to Ambient R JA (Note 7) 78.1 C/W (Note 8) 104 Thermal Resistance Junction to Lead (Note 9) 10.9 R JL Operating and Storage Temperature Range T T -55 to +150 C J, STG ESD Ratings (Note 10) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 8,000 V 3B Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with the collector lead on 52mm x 52mm 2oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 6. Same as note (5), except the device is mounted on 25mm x 25mm 2oz copper. 7. Same as note (5), except the device is mounted on 25mm x 25mm 1oz copper. 8. Same as note (5), except the device is mounted on minimum recommended pad layout. 9. Thermal resistance from junction to solder-point (at the end of the collector lead). 10. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 March 2015 FZT1048A Diodes Incorporated www.diodes.com Document Number DS33182 Rev. 3 - 2