S1V Green 1.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER Features Mechanical Data Glass Passivated Die Construction for High Reliability Case: SMA Low Forward Voltage Drop Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Surge Overload Rating to 30A Peak Moisture Sensitivity: Level 1 per J-STD-020 Ideally Suited for Automated Assembly Terminals: Lead-Free Plating (Matte Tin Finish). Solderable per Very High Reverse Breakdown Voltage MIL-STD-202, Method 208 e3 Lead-Free Finish RoHS Compliant (Notes 1 & 2) Polarity: Cathode Band or Cathode Notch Halogen and Antimony Free. Green Device (Note 3) Weight: 0.064 grams (Approximate) Top View Bottom View Ordering Information (Note 4) Part Number Qualification Case Packaging S1V-13-F Commercial SMA 5,000/Tape & Reel Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See S1V Maximum Ratings ( T = +25C, unless otherwise specified.) A Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Value Unit Peak Repetitive Reverse Voltage V RRM Working Peak Reverse Voltage V 2,000 V RWM DC Blocking Voltage VR RMS Reverse Voltage 1400 V V R(RMS) 1.0 A Average Rectified Output Current T = +100C I T O Non-Repetitive Peak Forward Surge Current 30 A I FSM 8.3ms Single Half Sine-Wave Superimposed on Rated Load 2 2 2 I t Rating for Fusing (t < 8.3ms) I t 3.74 A S Thermal Characteristics Characteristic Symbol Value Unit Typical Thermal Resistance, Junction to Ambient (Note 5) 50 C/W R JA Operating and Storage Temperature Range -55 to +150 C T T J, STG Electrical Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Min Typ Max Unit 2,000 V Reverse Breakdown Voltage(Note 7) I = 5A V R (BR)R 1.0 1.3 V Forward Voltage I = 1.0A V F F Peak Reverse Leakage Current T = +25C 0.2 5.0 A I A R 37 100 at Rated DC Blocking Voltage T = +125C A Typical Total Capacitance (Note 6) C 4 pF T Notes: 5. Thermal resistance junction to ambient at 0.375 inch (9.5mm) lead length. 6. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 7. Short duration pulse test used to minimize self-heating effect. 2 of 5 S1V March 2018 Diodes Incorporated www.diodes.com Document number: DS39697 Rev. 3 - 2