SBR10200CTB 10A SBR SUPER BARRIER RECTIFIER Features Mechanical Data 2 Excellent High Temperature Stability Case: D PAK Patented Super Barrier Rectifier Technology Case Material: Molded Plastic, UL Flammability Classification Rating 94V-0 Soft, Fast Switching Capability Moisture Sensitivity: Level 1 per J-STD-020 Lead Free Finish, RoHS Compliant (Note 1) Terminals: Matte Tin Finish annealed over Copper leadframe. Also Available in Green Molding Compound (Note 2) Solderable per MIL-STD-202, Method 208 Weight: 1.65 grams (approximate) 2 Package Pin Out D PAK Configuration Ordering Information (Notes 2 and 3) Part Number Case Packaging 2 SBR10200CTB D Pak (TO-263) 50 pieces/tube 2 SBR10200CTB-13 D Pak (TO-263) 800 / Tape & Reel 2 SBR10200CTB-G D Pak (TO-263) 50 pieces/tube 2 SBR10200CTB-13-G D Pak (TO-263) 800 / Tape & Reel Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes 2. For Green Molding Compound version part numbers, add- suffix to part number above. Examples: SBR10200CTB-G. 3. For packaging details, go to our website at SBR10200CTB Maximum Ratings (Per Leg) T = 25C unless otherwise specified A Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Symbol Value Unit V Peak Repetitive Reverse Voltage RRM Working Peak Reverse Voltage 200 V V RWM DC Blocking Voltage V RM Per Leg 5 Average Rectified Output Current I A O Total 10 Non-Repetitive Peak Forward Surge Current 8.3ms 80 A I FSM Single Half Sine-Wave Superimposed on Rated Load Thermal Characteristics (Per Leg) Characteristic Symbol Value Unit Maximum Thermal Resistance (per leg) 2 C/W R JC Operating and Storage Temperature Range T , T -65 to +175 C J STG Electrical Characteristics (Per Leg) T = 25C unless otherwise specified A Characteristic Symbol Min Typ Max Unit Test Condition - 0.85 0.92 I = 5A, T = 25C F J Forward Voltage Drop (Per Leg) V V F - 0.69 0.74 I = 5A, T = 125C F J V = 200V, T = 25C - - 50 A R J Leakage Current (Note 4) I R - - 10 mA V = 200V, T = 125C R J I = 1A, V = 30V, F R Reverse Recovery Time t - 15 20 ns rr di/dt = 100A/s, T = 25C J Notes: 4. Short duration pulse test used to minimize self-heating effect. 2 of 4 July 2011 SBR10200CTB Diodes Incorporated www.diodes.com Document number: DS31707 Rev. 4 - 2 SBR is a registered trademark of Diodes Incorporated.