ZXCT1012ET5TA

ZXCT1012 REDUCED HEIGHT MICRO-POWER CURRENT MONITOR Description Pin Assignments The ZXCT1012 is a high side current sense monitor. Using (Top View) this type of device eliminates the need to disrupt the ground plane when sensing a load current. NC 1 5 SENSE- The ZXCT1012 takes the voltage developed across a small value resistor and translates it into a proportional output GND 2 current. A user defined output resistor scales the output current into a ground referenced voltage. 3 4 OUT SENSE+ The ZXCT1012 has the accuracy specification of the ZXCT1010 but in TSOT25. TSOT25 A minimum operating current of just 3.5 A, combined with its TSOT25 package make it suitable for portable battery equipment where size and current consumption are critical. The wide input voltage range down to as low as 2.5V make it suitable for a wide range of applications requiring direct operation from a battery. Features Applications 2.5V to 20V supply range Battery fuel gauge 3.5A quiescent current Battery chargers Current output - user set gain Overcurrent monitor Thin package - TSOT25 Power management Temperature range -40 to 85C Typical Application Circuit R SENSE V IN SENSE+ SENSE- ZXCT1012 GND OUT R LOAD V OUT R OUT 1 of 9 September 2011 ZXCT1012 Diodes Incorporated www.diodes.com Document number: DS33444 Rev. 2 - 2 ZXCT1012 REDUCED HEIGHT MICRO-POWER CURRENT MONITOR Pin Descriptions Pin Name Description No connection 1 N/C Ground connection 2 GND Output current pin. Current generated due to a difference voltage between V and V flows out of this pin. A suitable SENSE+ SENSE- 3 OUT value resistor connected to ground creates an output voltage. The maximum voltage out of this pin will be V - 1.5V. SENSE- This pin should be connected to the rail whose current is being measured and also provides power to internal circuitry. It is the positive input of the current monitor and has an input range from 4 SENSE+ 20V down to 2.5V. The current through this pin varies with differential sense voltage. This is the negative input of the current monitor and has an input 5 SENSE- range from 20V down to 2.5V. Absolute Maximum Ratings (T = 25C) A Description Rating Unit VMax. 20 V SENSE+ Voltage on any pin(relative to GND pin) -0.6 and V +0.5 V SENSE+ V (Note 1) -0.15 to 3 V SENSE Ambient Operating Temperature Range -40 to 85 C Storage Temperature -55 to 150 C Maximum Junction Temperature 150 C 300 Power Dissipation (T = 25C) mW A (De-rate to 0 at 150C) Package R P 25C JA DISS (Note 2) TSOT25 250C/W 500mW Recommended Operating Conditions Symbol Parameter Min. Max. Units V Sense+ range 2.5 20 V IN T Ambient temperature range differential -40 85 C A V Sense voltage 10 2500 mV SENSE V Output voltage swing 0 V-15 V OUT SENSE- Operation above the absolute maximum rating may cause device failure. Operation at the absolute maximum ratings, for extended periods, may reduce device reliability. Notes: 1. V is defined as the differential voltage between the SENSE+ and SENSE- pins. (V = V - V ) SENSE SENSE SENSE+ SENSE- 2. Mounted on 30mm x 16mm x1.1mm FR4 board with 1oz copper. 2 of 9 September 2011 ZXCT1012 Diodes Incorporated www.diodes.com Document number: DS33444 Rev. 2 - 2