REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes in accordance with NOR 5962-R068-92 91-12-05 Monica L. Poelking B Changes in accordance with NOR 5962-R170-92 92-04-17 Monica L. Poelking C Changes in accordance with NOR 5962-R131-93 93-04-12 Monica L. Poelking D Revise for QD certification. New boilerplate. Editorial changes throughout. - 00-02-17 Raymond Monnin ljs E Correct page 2 generic. Editorial changes on pages 1 and 4. -les 02-05-01 Raymond Monnin The original first page of this drawing has been replaced. REV SHEET REV SHEET REV STATUS REV E E E E E E E E E E E E OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 PMIC N/A PREPARED BY Monica L. Grosel DEFENSE SUPPLY CENTER COLUMBUS CHECKED BY COLUMBUS, OHIO 43216 STANDARD D. A. DiCenzo MICROCIRCUIT DRAWING APPROVED BY N. A. Hauck THIS DRAWING IS AVAILABLE MICROCIRCUIT, DIGITAL, ECL, QUAD 2-INPUT FOR USE BY ALL NONINVERTING MULTIPLEXER, MONOLITHIC DEPARTMENTS AND AGENCIES OF THE DRAWING APPROVAL DATE SILICON DEPARTMENT OF DEFENSE 24 July 1987 AMSC N/A REVISION LEVEL SIZE CAGE CODE 5962-87566 E A 67268 SHEET 1 OF 12 DSCC FORM 2233 APR 97 5962-E371-02 DISTRIBUTION STATEMENT A. Approved for public release distribution is unlimited. 1. SCOPE 1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example: 5962-87566 01 E X Drawing number Device type Case outline Lead finish (see 1.2.1) (see 1.2.2) (see 1.2.3) 1.2.1 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 10H558 Quad, two-input, noninverting multiplexer 1.2.2 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style E GDIP1T-16 or CDIP2-T16 16 dual-in-line F GDFP2-F16 or GDFP3-F16 16 flat package 2 CQCC1-N20 20 square chip carrier 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. Supply voltage range............................................................... -8.0 V dc to 0.0 V dc Input voltage range ................................................................ 0.0 V to -5.2 V dc Storage temperature range...................................................... -65C to +165C Lead temperature (soldering, 10 seconds) ............................ +300C Junction temperature (T ) ...................................................... +165C J Maximum power dissipation (P ) ........................................... 320 mW D Thermal resistance, junction-to-case ( ) ............................. See MIL-STD-1835 JC 1.4 Recommended operating conditions. Supply voltage range (V ) .................................................... -5.46 V minimum to -4.94 V maximum CC Ambient operating temperature range (T ) ............................ -55C to +125C A Minimum high level input voltage (V ): IH T = +25C ......................................................................... -0.780 V dc A T = +125C ....................................................................... -0.650 V dc A T = -55C .......................................................................... -0.840 V dc A Maximum low level input voltage (V ) .................................... -1.950 V dc IL SIZE STANDARD 5962-87566 A MICROCIRCUIT DRAWING DEFENSE SUPPLY CENTER COLUMBUS REVISION LEVEL SHEET COLUMBUS, OHIO 43216-5000 E 2 DSCC FORM 2234 APR 97