REVISIONS
LTR DESCRIPTION DATE (YR-MO-DA) APPROVED
A Add RHA data. Editorial changes throughout - jak.
99-07-02 Monica L. Poelking
B Change ground bounce limits VOLP, VOLV, VOHP, and VOHV in table I.
02-04-12 Thomas M. Hess
Update boilerplate to MIL-PRF-38535 requirements. - CFS
C Update the boilerplate paragraphs to current requirements as specified in 09-04-15 Thomas M. Hess
MIL-PRF-38535. - jak
REV
SHEET
REV C C C
SHEET 15 16 17
REV STATUS REV C C C C C C C C C C C C C C
OF SHEETS
SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14
PMIC N/A
PREPARED BY
DEFENSE SUPPLY CENTER COLUMBUS
Joseph A. Kerby
COLUMBUS, OHIO 43218-3990
1. SCOPE
1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M)
and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or
Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN.
1.2 PIN. The PIN is as shown in the following example:
5962 R 95619 01 V X A
Federal RHA Device Device Case Lead
stock class designator type class outline finish
designator (see 1.2.1) (see 1.2.2) designator (see 1.2.4) (see 1.2.5)
\ / (see 1.2.3)
\/
Drawing number
1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are
marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A
specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
1.2.2 Device type(s). The device type(s) identify the circuit function as follows:
Device type Generic number Circuit function
01 54ACTQ16244 16-bit buffer/line driver with three-state outputs, TTL
compatible inputs
1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows:
Device class Device requirements documentation
M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN
class level B microcircuits in accordance with MIL-PRF-38535, appendix A
Q or V Certification and qualification to MIL-PRF-38535
1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows:
Outline letter Descriptive designator Terminals Package style
X GDFP1-F48 48 Flat pack
1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A
for device class M.
SIZE
STANDARD
5962-95619
A
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
REVISION LEVEL SHEET
COLUMBUS, OHIO 43218-3990
C
2
DSCC FORM 2233
APR 97