Bussmann
Specialty Fuse GLR
Fast-Acting, Non-Rejecting
& HLR
Dimensional Data
FUSE
0.63"
(15.9mm)
FUSE AND CARRIER
2.250''
57.15mm
Catalog Symbol: GLR (Fuse) HLR (Fuseholder)
.850''
.720''
21.59mm
Fast-Acting, Non-Rejection Style Fuse 18.29mm
Ampere Rating: -15 Amperes
Line Lead
Voltage Rating: 300 Volts AC or less
.850''
C
L
Interrupting Rating: 10,000 Amperes 21.59mm
Agency Information:
GLR Fuse:
Load Lead
UL Listed, Std. 248-14
MOUNTING HOLE
-15A/300 Vac, Guide JDYX, File E19180
.255''
.870''
CSA Certified, C22.2 No. 248.14, 0-10A/300 Vac
6.48mm
22.10mm
Class 1422-01, File 53787
HLR Fuseholder:
.635''
.740'' 16.13mm
UL Recognized, 12A, 300 Vac, Guide IZLT2, File E14853
18.80mm
CSA Certified, 12A, 300 Vac, Class 6225-01, File 47235
.410''
10.41mm
HLR-2A:
Knockout Hole Keyhole Punch
UL Recognized, 15A, 300 Vac, Guide IZLT2, File E14853
CSA Certified, 15A, 300 Vac, Class 6225-01, File 47235
Time-Current Characteristic CurvesAverage Melt
Electrical Ratings for Type GLR Fuses and Non-Rejection
AMPERE
Style Carriers
RATING
100
Fuse Carrier Fuse Carrier
GLR- HLR GLR-5 HLR
GLR- HLR GLR-6 HLR
GLR-1 HLR GLR-7 HLR
GLR-1 HLR GLR-8 HLR
10
GLR-1 HLR GLR-9 HLR
GLR-2 HLR GLR-10 HLR
GLR-3 HLR GLR-12 HLR
GLR-4 HLR GLR-15 HLR-2A
General Information:
1
HLR carrier comes with 6 of #18 red insulated solid copper wire
attached to the line side.
Customer inserts a #18 insulated solid copper wire into load side
receptacle.
Order part number HLR-2A to obtain 6 of #18 black insulated solid
copper wire pre-installed in a load side receptacle.
.1
Order part number HLR-2L to obtain 6 of #18 black insulated solid
copper wire packaged loose (un-installed).
An alternative to the HLR fuseholder is the A fuseholder. The A
fuseholder comes WITHOUT leads. The customer inserts #18
insulated solid copper wire into the line side receptacle as well as into
the load side receptacle. It has the same body dimensions, utilizes the
same mounting hole, and takes the same mounting clips as the HLR.
.01
The A fuseholder is UL Recognized, 10A, 300Vac, Guide IZLT2, File
E14853 and CSA Certified, 10A, 300Vac, Class 6225-01, File 47235.
CURRENT IN AMPERES
Fuse and knob are an integral one-piece unit. There are no
replacement knobs (caps).
The only controlled copy of this Data Sheet is the electronic read-only version located on the
Units can be panel mounted with a separate steel clip. For the
Bussmann Network Drive. All other copies of this document are by definition uncontrolled.
knockout hole (see above), choose #BK/A-104. For the keyhole
This bulletin is intended to clearly present comprehensive product data and provide technical
information that will help the end user with design applications. Bussmann reserves the right,
punch type hole, choose #6374 for panels .043 to .062 thick, or
without notice, to change design or construction of any products and to discontinue or limit
#4909 for panels .030 to .042 thick.
distribution of any products. Bussmann also reserves the right to change or update, without
Do not put tension on line (rear) terminal of fuse-holder.
notice, any technical information contained in this bulletin. Once a product has been selected,
it should be tested by the user in all possible applications.
CE logo denotes compliance with European Union Low Voltage Directive
Form No. GLR & HLR
(50-1000 Vac, 75-1500 Vdc). Refer to Data Sheet: 8002 or contact
Page 1 of 1
Bussmann Application Engineering at 636-527-1270 for more information.
5-22-02 SB02233
Data Sheet: 2032
TIME IN SECONDS
.1
1
1
1.5
2
5
10
7
10
15
100
200