HALOGEN 5 x 20mm Time-Delay, Ceramic Tube Fuses HF Pb S505 Series FREE Dimensions - mm 5 x 20mm fuse with Ratings above 6.3A have a maximum optional axial leads 0.81mm diameter lead With TR2 packaging code, leadwire length is 19.05mm Description Time-delay, high breaking capacity Available with optional axial leads Agency Information Ceramic tube, silver-plated endcap construction (500mA-800mA), UL Recognized Card: Guide JDYX2, File E19180, JDYX8, File E19180 nickel-plated brass endcap construction (1-12A) CSA Component Acceptance: File 53787 Optional sleeve is flexible flouropolymer (UL flammability rating VW-1). SEMKO: File 816547, 1119019 Consult factory for details. VDE: File 40014091, 40024352, 40023140 5 x 20mm physical size BSI: File KM55676 Designed to IEC 60127-2 (500mA-10A) & extension 12A IMQ: File CA03.00100 and CA03.00529 Electrical Characteristics PES+JET: File 1641-31003-1009, 1641-31003-1010, 1.5I 2.1I 2.75I 4I 10I 1641-31003-1011, 1641-31003-1012, 1641-31003-2001, n n n n n 1641-31003-2002 Min Max Min Max Min Max Min Max CCC: File 2002010207011295, CQC11012061930 Amps min. min. ms s ms s ms ms KC-Mark: File SU05011-4012A, SU05011-5004A <1A 60 30 250 80s 50 5s 5 150 Ordering 1A-3.15A 60 30 750 80s 95 5s 10 150 Specify packaging code (insert packaging code prefix before part number) 4A-6.3A 60 30 750 80s 150 5s 10 150 e.g., BK- (or BK1-/TR2-) S505-1-R 8A-12A 30 30 750 80s 150 5s 10 150 Specify option codes if desired (for axial leads, insert V between catalog series and amp rating) e.g., BK-S505-V-1-R Specifications Voltage Interrupting Typical DC Cold Typical Typical Agency Information Product Rating Rating at Rated Resistance Pre-arching Voltage CCC/ PSE/ 1 2 2 2 3 4 5 5 5 5 Code AC Voltage (50Hz) AC () I t (A s)AC Drop (mV) IMQ VDE SEMKO cURus CQC JET CSA KC BSI X S505-500-R 250 1500 0.5070 0.188 295 X X X X X X X X S505-800-R 250 1500 0.2370 0.632 189 X X X X X X X S505-1-R 250 1500 0.1401 1.28 152.5 X X X X X X X X X S505-1.25-R 250 1500 0.1075 2.22 150 X X X X X X X X X S505-1.6-R 250 1500 0.0700 6.78 125 X X X X X X X X X S505-2-R 250 1500 0.0545 9.60 118.5 X X X X X X X X X S505-2.5-R 250 1500 0.0395 16.60 115 X X X X X X X X X S505-3.15-R 250 1500 0.0305 36.60 102.5 X X X X X X X X X X S505-4-R 250 1500 0.0185 38.45 86.5 X X X X X X X X X X S505-5-R 250 1500 0.0131 71.30 77.5 X X X X X X X X X X S505-6.3-R 250 1500 0.0102 111 75 X X X X X X X X X X 6 S505-8-R 250 1500 0.0077 228 73 X X X X X XX X X 6 S505-10-R 250 1500 0.0061 397 72 X X X X X XX X X X S505-12-R 250 1000 0.0053 713.7 77 X X 1. Interrupting ratings: 500mA to 10A were measured at 70% to 80% PF on AC,12A was measured 4. Typical Voltage Drop( Voltage Drop was measured at 20C ambient temperature at rated current). at 100% PF on AC. 5. No room forCS &K on the fuse endcap for Non-V Rev. No room forIM,CQC orK 2. Typical DC Cold Resistance (measured at <10% of rated current). on fuse endcap for -V Rev. 2 3. Typical Pre-Arching I t (measured at listed interrupting rating and rated voltage if not specified) 6. CQC only. 2 With specified, the typical I t value is measured at 10 times of rated current under DC. 1111 BU-SB11758 Page 1 of 2 Data Sheet 2037Time-Current Curves Packaging Code Packaging Code Prefix Description BK- 100 fuses packed into a cardboard carton BK1- 1000 fuses packed into a poly bag TR2- 1500 fuses on tape and reel (19.05mm leadwire length) Option Code Option Code Description -V Axial leads copper tinned wire with nickel-plated brass endcaps The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice, any technical information con- tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Life Support Policy: Cooper Bussmann does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life sup- port systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2011 Cooper Bussmann www.cooperbussmann.com 1111 BU-SB11758 Page 2 of 2 Data Sheet 2037