CBF-30 Eaton

www.martekpower.com CBF30 EMI Filter FEATURES FEATURES MIL-STD-461D Compliance CE101 and CE102 for CB30S, CB5S & CB10D DC/DC converters Does Not Require External Components Meets Environmental Requirements of MIL-STD-810E and MIL-S-901C SPECIFICASPECIFICATIONSTIONS Input Voltage (maximum) 50 Vdc Rated Output Current 2.8 A Isolation (Input/Output to Case) 500 Vdc AC INSERTION LOSS Operating Temperature AC INSERTION LOSS -55 to +100 C Storage Temperature -55 to +125 C Gain 20db Insulation Resistance 50 MOhm (min.) (measured at 50Vdc) 0 Weight 0.36 oz. 10.1 grams -20 Size 1.0 x 0.70 x 0.38 inch 25.4 x 19.1 x 9.7 mm 3 Volume -40 .285 inch 3 4.71 cm -60db DC Insertion Loss (nominal) 0.7 Vdc 1kHz 10kHz 100kHz 1MHz 5MHz Material FREQUENCY Pin Brass(Solder Plating) Case Aluminum 5052-H32 CASE DRAWINGS CASE DRAWINGS 4 places .100/2.54 Inches/Millimeters .040/1.02 DIA .005/0.13 .020/0.5 1.00/25.4 5 places .70/17.8 .600/15.24 .600/ 15.24 .350/8.89 .100 .100/2.54 2.54 0 0 0 0 .320.03 / 8.10.8 .38/9.7 0 .045/1.14 .22/5.6 .78/19.8 .100/2.54 .900/22.86 Tolerances: inches - x.xx = 0.03 mm - x.x = 0.8 x.xxx = 0.015 x.xx = 0.4 >> 22 1111 Knox Street Torrance CA 90502 USA Tel: +1 310 202 8820 sales martekpower.comwww.martekpower.com EMI COMPARISON GRAPHS - CB30S EMI COMPARISON GRAPHS - CB30S 28 V - 5 Watts MIL-STD-461D,CE101 in dBuA 120 100 0 80 60 40 20 0 -20 .03 .04 .06 .08.1 .2 .4 .6 .8 1 2 4 6 8 10 kHz 28 V - 5 Watts MIL-STD-461D,CE102 in dBuA 100 80 0 60 40 20 WITH CBF30 WITHOUT CBF30 0 -20 .01 .02 .04 .06.08.1 .2 .4 .6 .8 1 2 4 6 8 10 MHz 28 V - 30 Watts MIL-STD-461D,CE101 in dBuA 120 100 0 80 60 40 20 0 -20 .03 .04 .06 .08 .1 .2 .4 .6 .8 1 2 4 6 8 10 kHz 28 V - 30 Watts MIL-STD-461D,CE102 in dBuA 100 80 60 0 40 20 WITH CBF30 0 WITHOUT CBF30 -20 .01 .02 .04 .06.08.1 .2 .4 .6 .8 1 2 4 6 810MHz >> 23 1111 Knox Street Torrance CA 90502 USA Tel: +1 310 202 8820 sales martekpower.com