Stacklights 2.2 E26 Series Contents StacklightsE26 Series 2 Description Page E26 Series 2 Product Identification V7-T2-33 2 Catalog Number Selection V7-T2-34 Product Selection . V7-T2-35 2 Replacement Parts V7-T2-40 Technical Data and Specifications V7-T2-41 2 Ratings . V7-T2-42 Mounting Instructions . V7-T2-43 2 Dimensions . V7-T2-44 2 2 2 2 2 Standards and Product Description Features Benefits Certifications 2 The E26 stacklight unit is a Modular construction Combination of visible and CE 60947-5-1 modular system that provides audible alarms Six lens colors UL 508File No. E131568 2 illuminated and audible status Modular components Variety of lamp types and cUL C22.2 No. 14File indication in all directions. reduce inventory voltages No. E131568 2 Easily assembled plug-in requirements, increase Mono-tonal, bi-tonal and modular units include flexibility intermittent audible alarms constant, flashing and strobe 2 Steady and flashing modes light units, as well as mono- allow one light to signal tonal, bi-tonal, intermittent multiple conditions 2 Ingress Protection audible alarms. Stacklights No-tools assembly permits may be assembled in a Stacklight base and light easy lamp replacement 2 variety of configurations, units: IP65, NEMA 4, 4X which are identified in the and 13 2 Maximum Configurations Alarm units: IP20, NEMA 1 table on Page V7-T2-33. Several lamp, color and 2 Electrical Shock Protection mounting options further Stacklight base and light enhance the stacklights unit: IP2X 2 versatility. Alarm units: IP0X 2 2 2 2 2 2 2 2 2 2 V7-T2-32 Volume 7Logic Control, Operator Interface and Connectivity Solutions CA08100008EMarch 2014 www.eaton.comStacklights 2.2 E26 Series Product Identification 2 Complete Stacklight Modules Stacklights accept a 2 maximum of six Level 3 incandescent or LED light 2 modules or two Xenon Level Flasher modules and can 2 2 be mounted in any position Standard Stacklight Base on the stack. Level 1 2 For use with incandescent or Alarm units are mounted in standard LEDs for steady, the top most position only. Stack- light non-flashing illumination or 2 Base with flashing LEDs for Xenon Strobe flashing illumination. Bases Sets are similar to standard 2 include terminal block for Extension lens/diffuser units, except Tube wiring, stacklight cover and each set consists of two lens 2 gasket. See Page V7-T2-38. units. The lower unit includes Mounting the electronics and is Base 2 permanently fused to the upper unit which contains the 2 Xenon lamp. Xenon units may be placed in any position in a complete stacklight unit. 2 Maximum Configurations They will flash 60 times per minute when used with a Incandescent 2 Flashing Stacklight Base standard or flashing base. or Xenon Alarm Max. Number LED Modules Modules Modules of Modules Allows configuration of each See Page V7-T2-36. 2 light in the stack for either 6 6 steady or 60 times per 5 1 6 2 minute flashing illumination. Flashing circuit for use with 41 5 incandescent lamps only. 3 115 2 (Maximum allowable number 22 4 of light modules is 2 at 12V, 4 2 1 214 at 24V and 6 at 48V and Alarms above.) See Page V7-T2-38. May be fitted to the top of a 2 For flashing LEDs use complete stacklight unit or standard base with flashing directly to the stacklight 2 LED light module. bases, if desired. Available in three versions, each with 2 adjustable sound levels. See Page V7-T2-39. 2 2 2 Light Modules 2 Available in a variety of colors for both incandescent lamps 2 and LED lamps. To maximize illumination and light dispersion, incandescent units include an 2 opal white diffuser while LED diffusers are clear. See Page 2 V7-T2-36. 2 2 2 2 Volume 7Logic Control, Operator Interface and Connectivity Solutions CA08100008EMarch 2014 www.eaton.com V7-T2-33