Bussmann Class J Fuseblocks JP Series Pyramid Style 600 Volt, 30 Amps Dimensional Data *All other dimensions ( 0.015) ( 0.40mm) DIN-RAIL MOUNTING SCREW 8 (203.2mm) APART. END STOPS - PREVENT BLOCK MOVEMENT WHEN CHANGING FUSES 4.00 MAX. (101.6mm) 3.75 ( 0.02) (95.3mm) ( 0.50) 1.88 (47.6mm) 1.19 (30.2mm) 2.38 (60.4mm) 3.29 ( 0.03) Catalog Symbol: JP Series (83.6mm) ( 0.76) Pyramid Style Fuseblock Ampere Rating: 30 Amperes Voltage Rating: 600 Volts Withstand Rating: 200,000 RMS Sym. Amps Agency Information: U.L. Listed, U.L. 512, Guide IZLT, File E14853 2.78 3.06 (70.6mm) CSA Certified, C22.2 No. 39, Class 4225-04, File 47235 (77.8mm) For use with Class J Fuses (Bussmann LPJ, JKS) U.L. Flammability: 94VO Material: Thermoplastic ADAPTER FOR 35mm 3.13 Pyramid J Fuseblock 30A, 600V 3-Pole Panel or 35mm SYMMETRICAL DIN-RAIL MOUNTING (79.5mm) DIN-Rail Mount Clips with Reinforcing Springs Mounting Catalog Numbers Screws with Box Pressure Copper Plate Aluminum Only JP60030-3PR JP60030-3CR JP60030-3COR Panel ( 10-14 CU ONLY) ( 2-14 CU/AL) ( 2-14 CU ONLY) With JP60030-3PRA JP60030-3CRA JP60030-CORA DIN-Rail ( 10-14 CU ONLY) ( 2-14 CU/AL) ( 2-14 CU ONLY) Adapter* *Adapter Only for DIN-Rail - Cat No. JPA-3. CE logo denotes compliance with European Union Low Voltage Directive (50-1000 Vac, 75-1500 Vdc). Refer to BIF document 8002 or contact Bussmann Application Engineering at 314-527-1270 for more information. The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Form No. JP Series Page 1 of 1 BIF Doc 1108 1-16-02 SB02003