pfs Pa pfs Pa pfs Pa pfs Pa EC centrifugal fans - RadiCal Series R3G225 RE 225 mm Highlights: Backward curved 7-blade impeller, single phase motor Output 10 VDC, max. 1.1 mA, Tach output, Control input 0-10 VDC / PWM Motor current limit, Soft start, Locked-rotor protection, Over temperature protected electronics / motor Mounting position: Any Condensate discharge holes: None, open rotor Ingress protection of IP54 Material: Fiberglass reinforced composite Impeller: PA6 Direction of rotation: Clockwise, seen on rotor Nominal Data o Type CFM VAC VAC Watts RPM C g R3G225-RE19-04 753.4 115 100...130 50/60 Yes 170 2,870 -25...50 1,750 IP54 Yes R3G225-RE07-03 765.2 230 200...240 50/60 Yes 170 2,860 -25...60 1,750 IP54 Yes (1) Nominal data at maximum load. I n Pe L A w R3G225-RE19-04 Curves Curves A rpm W dB(A) (115V) Druck p f s Pa fr Rho=1,2kg/m 3 qv cfm 0 100 200 300 400 500 600 700 800 3,1 760 Measurement: LU-142355 A 1 2985 153 1.99 78 3 740 720 2,9 A 2 2870 170 2.20 74 700 Air performance measured 2,8 680 2,7 as per: ISO 5801, Installation A 3 2895 162 2.09 68 660 2,6 640 category A, without protection 2,5 620 A 4 2965 150 1.95 73 600 against accidental contact. 2,4 580 2,3 560 4 Suction-side noise levels: A 5 2500 90 1.17 75 2,2 540 2,1 520 L A as per ISO 13347, L A W P A 6 2500 113 1.45 70 500 2 measured at 1m distance to 480 1,9 8 460 A 7 2500 104 1.34 66 fan axis. 1,8 440 1,7 420 A 8 2500 90 1.17 69 The values given are valid 3 400 1,6 380 1,5 under the measuring 360 7 A 9 1,4 2000 46 0.60 69 conditions mentioned and may 340 1,3 320 12 vary accoring to the actual A 10 2000 58 0.74 65 300 1,2 280 installation situation. 1,1 260 A 11 2000 53 0.69 61 1 240 11 With any deviation to the 0,9 220 2 A 12 2000 46 0.60 63 200 0,8 standard set-up, the specific 16 180 6 0,7 values have to be checked 160 0,6 A 13 1500 19 0.25 63 15 140 and reviewed once installed 10 0,5 120 or fitted. A 14 100 0,4 1500 25 0.31 59 80 14 0,3 60 For detailed information on 0,2 A 15 1500 23 0.29 55 40 0,1 20 the measuring set-up, please 13 9 5 1 A 16 1500 19 0.25 57 0 0 contact ebm-papst. 0 100 200 300 400 500 600 700 800 900 1.000 1.100 1.200 1.300 1.400 qv m 3/h A 1 A 2 A 3 A 4 A 5 A 6 A 7 A 8 A 9 A 10 A 11 A 12 A 13 A 14 A 15 A 16 p f s Pa Air flow Nominal voltage pfs E IN H2O Voltage range Hertz Ball bearings Power input (1) Speed (1) Temperature range Mass Ingress Protectin Rating UL pf s Pa pf s Pa pf s Pa p f s Pa I n Pe L A w R3G225-RE07-03 Curves A rpm W dB(A) (230V) Druck p f s Pa fr Rho=1,2kg/m 3 qv cfm 0 100 200 300 400 500 600 700 800 780 3,1 Measurement: LU-129100 760 AB 1 3030 151 1.25 78 3 740 2,9 720 AB 2 2910 168 1.40 74 Air performance measured 700 2,8 680 2,7 as per: ISO 5801, Installation AB 3 2860 170 1.40 68 660 2,6 category A, without protection 640 620 2,5 AB 4 2970 157 1.35 73 against accidental contact. 600 2,4 580 2,3 Suction-side noise levels: A 5 560 4 B 2700 107 0.89 76 2,2 540 L A as per ISO 13347, L A 2,1 W P 520 AB 6 2700 134 1.11 72 500 2 measured at 1m distance to 480 1,9 8 fan axis. AB 7 2700 135 1.15 67 460 1,8 440 420 1,7 The values given are valid AB 8 2700 118 1.01 70 3 400 1,6 under the measuring 380 1,5 360 AB 9 7 conditions mentioned and may 2200 58 0.48 70 1,4 340 1,3 320 vary accoring to the actual 12 AB 10 2200 73 0.60 67 300 1,2 installation situation. 280 1,1 260 AB 11 2200 73 0.62 62 1 240 11 With any deviation to the 0,9 220 AB 12 2200 64 0.55 65 2 standard set-up, the specific 200 0,8 16 180 6 0,7 values have to be checked 160 AB 13 1700 27 0.22 64 0,6 15 and reviewed once installed 140 10 0,5 120 or fitted. AB 14 1700 33 0.28 61 100 0,4 80 14 0,3 For detailed information on 60 A 15 B 1700 34 0.29 56 0,2 40 the measuring set-up, please 0,1 20 13 9 5 1 AB 16 1700 29 0.25 59 0 0 contact ebm-papst. 0 100 200 300 400 500 600 700 800 900 1.000 1.100 1.200 1.300 1.400 1.500 qv m 3/h R3G225-REXX-XX Depth of screw max. 10mm Depth of screw max. 5mm ( ) 0.20 5 ( ) ( +0.2) 3.48 88.4 ( ) 2.28 58 0.06 1.5 ( ) ( ) 3.90 99 1.10 28 +0.2 ( ) 3.54 90 A 1 A 2 Accessory part: Inlet nozzle Connection line PVC Connection line PVC ( ) 0.08 2 96358-2-4013, not included 4X AWG20 4 x brass 3G AWG20 3 x brass A 3 in the standard scope of delivery lead tips crimped lead tips crimped A 4 A 5 A 6 A 7 A 8 A 9 A 10 A 11 A 12 A 13 A 14 A 15 A 16 +20 ( ) 17.72 450 +10 ( ) 3.35 85 0.24 (6) p f s Pa ( ) 3.98 101 2.95 (75) ( ) 2.83 72 + ( 0.2) 6.04 153.5 ( ) 8.86 225 ( ) 5.75 146 0.18(4.5) 4X pfs E IN H2O ( ) 8.57 210 ( ) 8.78 223