CFSQ Hinges with built-in safety switch ELESA Original design Elesa Standards Main dimensions Fitting Weight L f f f h h h d d Code Description L B f H d C Nm g 1 1 2 3 1 2 4 3 4 427011 CFSQ.60-SH-6-C-A-D 53 70 110 34 45 - - 16 8 7.5 15 7 6.5 12.5 5 96 427013 CFSQ.60-SH-6-C-A-S 53 70 110 34 45 - - 16 8 7.5 15 7 6.5 12.5 5 96 427015 CFSQ.60-SH-6-C-B-D 53 70 110 34 45 51.5 22.5 16 8 7.5 15 7 6.5 12.5 5 96 427017 CFSQ.60-SH-6-C-B-S 53 70 110 34 45 51.5 22.5 16 8 7.5 15 7 6.5 12.5 5 96 427021 CFSQ.60-SH-6-F-A-D-2 53 70 110 34 45 - - 16 8 7.5 15 7 6.5 12.5 5 196 427023 CFSQ.60-SH-6-F-A-S-2 53 70 110 34 45 - - 16 8 7.5 15 7 6.5 12.5 5 196 427025 CFSQ.60-SH-6-F-B-D-2 53 70 110 34 45 51.5 22.5 16 8 7.5 15 7 6.5 12.5 5 196 427027 CFSQ.60-SH-6-F-B-S-2 53 70 110 34 45 51.5 22.5 16 8 7.5 15 7 6.5 12.5 5 196 427031 CFSQ.60-SH-6-F-A-D-5 53 70 110 34 45 - - 16 8 7.5 15 7 6.5 12.5 5 330 427033 CFSQ.60-SH-6-F-A-S-5 53 70 110 34 45 - - 16 8 7.5 15 7 6.5 12.5 5 330 427035 CFSQ.60-SH-6-F-B-D-5 53 70 110 34 45 51.5 22.5 16 8 7.5 15 7 6.5 12.5 5 330 427037 CFSQ.60-SH-6-F-B-S-5 53 70 110 34 45 51.5 22.5 16 8 7.5 15 7 6.5 12.5 5 330 Suggested tightening torque for assembly screws.Resistance tests AXIAL STRESS RADIAL STRESS 90 ANGLED STRESS Description Static load max limit Sa N Static load max limit Sr N Static load max limit S90 N CFSQ.60-SH-6 2100 2800 1300 Suggested tightening torque for assembly screws.For CFSQ. hinges with built-in safety switch, the reference value supplied is the max limit static load (Sa, Sr, S90), since these hinges can be used as safety devices. Above this value, the material may break, thus prejudicing the hinge functionality. Obviously a suitable factor, according to the importance and safety level of the specific application, must be applied to this value. The load values shown in the tables of the different hinges are the result of tests carried out in our laboratories under controlled temperature and humidity (23C-50% R.H.), under given conditions of use and for a limited period of time. Material Self-extinguish high-rigidity SUPER-technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour Black, matte finish. Rotation pin AISI 303 stainless steel. Standard executions Assembly by means of pass-through holes for M6 countersunk-head screws UNI 5933, DIN 7991. - C-A-D: axial connector, microswitch on the right. - C-A-S: axial connector, microswitch on the left. - C-B-D: rear connector, microswitch on the right. - C-B-S: rear connector, microswitch on the left. - F-A-D: axial cable, 2 or 5 m length, microswitch on the right. - F-A-S: axial cable, 2 or 5 m length, microswitch on the left. - F-B-D: rear cable, 2 or 5 m length, microswitch on the right. - F-B-S: rear cable, 2 or 5 m length, microswitch on the left. Cable type: UL/CSA STYLE 2587 3 X AWG 22. Features and applications - The hinge with built-in switch (ELESA patent) is a safety device because in case of accidental opening of doors, machine protections, or safety doors on machines and production equipment, it automatically breaks off the power supply hence protecting the operators. - This hinge can be subject to frequent washing cycles and can be used in any situation or environment where a special attention to cleaning and hygiene is requested, thanks to the IP67 protection class and the use of stainless steel elements for closing the hinge body. - Switch equipped with two contacts: one NC contact and one change-over NO contact, form C, see IEC EN 60947-5-1 standard. - Switch set with positive opening (in compliance with IEC EN 60947-5-1 standard, K attachment): the contacts break off for the direct movement of an actuator, onto which the working force is applied through non elastic elements. - Quick release switch: the stroke speed of the contact-holder slider does not depend on the working speed. - Easy to assemble: the built-in safety switch is integrated into a single body with the hinge, thus offering a very easy and fast assembly. This is a great advantage in comparison with some traditional systems which still require to set up separately a hinge and a safety switch connected by a special pin to replace the standard pin of the hinge. - Universal usage: CFSQ hinges can be assembled on the most common aluminium profiles.