GN 114.2-6-25 Elesa & Ganter

GN 114.2 Lock Pins technical informations Pin Zinc-plated steel, blue passivated. Pawl AISI 304 stainless steel. Spring AISI 301 stainless steel. Knob Plastic, polyamide based (PA) technopolymer, black-grey colour. Push button / Slide Plastic, technopolymer, Push button: red colour. Maximum working temperature 80 C. Accessories on request - Ball chains GN 111. - Retaining cables GN 111.2. - Spiral retaining cables GN 111.4. Features and applications Pins with axial lock GN 114.2 are used for quick fixing, connecting and locking of various jig and fixture systems. A typical application is location pins which have to be often removed and re-placed again. The two locking pawls can be retracted by pressing the button and on releasing it the pawls will be locked again. The rectangular shape of the locking pawls in stainless steel cretaes a linear contact area which gives an increased axial shear strength. The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use. Standard Elements Main dimensions Weight Double sided shearing force in kN d l d d d d l l Description a b g 1 -0.05 1 +0.4 2 3 4 5 2 3 7.5 GN 114.2-6-10 6 10 2.3 0.5 5.9 15 30 7 21 14 10 +0.5 7.5 GN 114.2-6-12 6 12 2.3 0.5 5.9 15 30 7 21 14 12 +0.5 7.5 GN 114.2-6-16 6 16 2.3 0.5 5.9 15 30 7 21 14 12 +0.5 7.5 GN 114.2-6-20 6 20 2.3 0.5 5.9 15 30 7 21 14 13 +0.5 7.5 GN 114.2-6-25 6 25 2.3 0.5 5.9 15 30 7 21 14 15 +0.5 7.5 GN 114.2-6-30 6 30 2.3 0.5 5.9 15 30 7 21 14 15 +0.5 7.5 GN 114.2-6-35 6 35 2.3 0.5 5.9 15 30 7 21 14 16 +0.5 7.5 GN 114.2-6-40 6 40 2.3 0.5 5.9 15 30 7 21 14 16 +0.5 7.5 GN 114.2-6-45 6 45 2.3 0.5 5.9 15 30 7 21 14 17 +0.5 7.5 GN 114.2-6-50 6 50 2.3 0.5 5.9 15 30 7 21 14 18 +0.5 10 GN 114.2-8-16 8 16 2.8 0.6 7.9 15 30 8.4 21 28 17 +0.5 10 GN 114.2-8-20 8 20 2.8 0.6 7.9 15 30 8.4 21 28 18 +0.5 10 GN 114.2-8-25 8 25 2.8 0.6 7.9 15 30 8.4 21 28 19 +0.5 10 GN 114.2-8-30 8 30 2.8 0.6 7.9 15 30 8.4 21 28 22 +0.5 10 GN 114.2-8-35 8 35 2.8 0.6 7.9 15 30 8.4 21 28 23 +0.5 10 GN 114.2-8-40 8 40 2.8 0.6 7.9 15 30 8.4 21 28 24 +0.5 10 GN 114.2-8-45 8 45 2.8 0.6 7.9 15 30 8.4 21 28 26 +0.5 10 GN 114.2-8-50 8 50 2.8 0.6 7.9 15 30 8.4 21 28 28 +0.5 12 GN 114.2-10-20 10 20 3.3 1 9.9 18 34 9.8 26 38 27 +1 12 GN 114.2-10-25 10 25 3.3 1 9.9 18 34 9.8 26 38 30 +1 12 GN 114.2-10-30 10 30 3.3 1 9.9 18 34 9.8 26 38 31 +1 12 GN 114.2-10-35 10 35 3.3 1 9.9 18 34 9.8 26 38 35 +1 12 GN 114.2-10-40 10 40 3.3 1 9.9 18 34 9.8 26 38 37 +1