GN 505-8-M4-OB Elesa & Ganter

GN 505 Quick-insert dowels for T-slots technical informations Material - Execution MB: zinc-plated steel, with increased torque. - Execution OB: zinc-plated steel, without increased torque. Features and applications T-nuts for aluminium extrusions GN 505 can be inserted vertically into a T-slot like Rhombus nuts GN 508.1. When tightening the clamping bolt, the nut will be forced into a crosswise position by the applied torque and firmly anchored in the T-slot. This action is achieved by using T-nut type MB which is intentionally fitted with an overtight fit requiring a higher torque. To remove the bolt and T-nut a 90 anticlockwise turn is sufficient to withdraw the two components with the clamped workpiece. The clamping face of the T-nut is serrated to ensure that a possible plating coat in the T-slot is penetrated to establish a good electrical contact. Standard Elements Main dimensions Weight b L H h h Description d g -0.1/-0.5 0.5 -0.1/-0.5 1 -0.4 2 1.6 GN 505-8-M4-MB 8 M4 16 8 5 7 -0.4 1.6 GN 505-8-M5-MB 8 M5 16 8 5 7 -0.4 1.6 GN 505-8-M6-MB 8 M6 16 8 5 6 -0.4 3.5 GN 505-10-M4-MB 10 M4 19 10 5.8 8 -1 3.5 GN 505-10-M5-MB 10 M5 19 10 5.8 7 -1 3.5 GN 505-10-M6-MB 10 M6 19 10 5.8 7 -1 3.5 GN 505-10-M8-MB 10 M8 19 10 5.8 6 -1 1.6 GN 505-8-M4-OB 8 M4 16 8 5 7 -0.4 1.6 GN 505-8-M5-OB 8 M5 16 8 5 7 -0.4 1.6 GN 505-8-M6-OB 8 M6 16 8 5 6 -0.4 3.5 GN 505-10-M4-OB 10 M4 19 10 5.8 8 -1 3.5 GN 505-10-M5-OB 10 M5 19 10 5.8 7 -1 3.5 GN 505-10-M6-OB 10 M6 19 10 5.8 7 -1 3.5 GN 505-10-M8-OB 10 M8 19 10 5.8 6 -1