FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Power Relay FTR-MY Series n FEATURES l Width 5mm, height 12mm (31% smaller than NY series) 2 area 100 mm , super slim , low power, compact and light weight 2.5gr. l Nominal power: 110mW (8% less than NY series), Operate power: 54mW High sensitive l High reliable contacts, bifurcated gold overlay silver alloy (cadmium free) l Conform to UL61010-1, UL61010-2-201, IEC/EN61010-1, IEC/EN61010-2-201 (max. 277VAC) l Dielectric strength: 3,000VAC l Surge strength: 5,080V l Safety standards UL, CSA, VDE, CQC l RoHS compliant Please see page 6 for more information l Plastic sealed type, RTIII n APPLICATIONS n PARTNUMBER INFORMATION FTR-MY A A 012 D Example (a) (b) (c) (d) (e) (a) Relay type FTR-MY : FTR-MY-Series (b) Cont act configuration A : 1 form A (c) Coil type A : Standard type (110mW) (d) Coil rated voltage 012 : 4.5.....24 VDC Coil rating table at page 3 (e) Contact material D : Gold overlay AgNi Actual marking does not carry the type name :FT E.g.: Ordering code: FTR-MYAA012D Actual marking: MYAA012D 1FTR-K1 SERIES FTR-MY SERIES n SPECIFICATION Item FTR-MY Remarks / Conditions Contact Configuration 1 form A Data Construction Bifurcated (cross bar) Material Gold overlay silver alloy Resistance (initial) Max. 30 m at 6VDC, 1A Contact rating 5A, 250VAC / 30VDC Max. carrying current 5A Max. switching current 5A Max. switching voltage 277VAC / 125VDC Max. switching power 1,250VA / 150W Min. switching load * 1 mA, 5VDC 6 Life Mechanical Min. 20 x 10 operations 3 Min. 100 10 operations (at 3A 250VAC, 30VDC resistive) Electrical 3 Min. 50 10 operations (at 5A 250VAC, 30VDC resistive) Coil Rated power (at 20 C) 110 mW Data Operate power (at 20 C) 54 mW Operating temperature range -40 C to +90 C (no frost) Timing Operate (at nominal voltage) Max. 10 ms (without bounce) Data Release (at nominal voltage) Max. 5 ms (without bounce) Insula- Resistance (initial) Min. 1,000M at 500VDC tion Open con- Dielectric strength 750VAC (50/60Hz) 1min tacts Contacts to 3,000VAC (50/60Hz) 1min coil Coil to Surge strength 5,080V / 1.2 x 50s standard wave contacts Clearance Min. 5.6mm Creepage Min. 5.6mm Other Misopera- Coil ON/OFF, 3 axes, total 6 10 to 55 to 10 single amplitude 0.75mm Vibration resis- tion cycles tance Endurance 10 to 55 to 10 single amplitude 2.5mm Coil OFF, 3 axes, total 6 hours Misopera- Coil ON/OFF, 3 axes, total 36 Min. 100m/s (11 1ms) tion operations Shock Coil OFF, 3 axes, total 18 opera- Endurance Min. 1,000m/s (6 1ms) tions Weight Approximately 2.5 g Sealing Plastic sealed RTIII * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2