TechnicalData Sheet BERGQUIST GAP PAD TGP 1500R Known as BERGQUIST GAP PAD 1500R October -2018 PRODUCT DESCRIPTION TYPICAL PROPERTIES OF CURED MATERIAL ThermallyConductive, ReinforcedGap FillingMaterial. Young s modulus iscalculated using 0.01in/min,step rateof strainwith a samplesize 0.79inch. Technology Silicone Physical Properties Appearance Black Hardness, Shore00 40 Reinforcement CarrierFiberglass ,Thirty second delay value Thickness 0.254 to 0.508mm ,ASTM D374 ,ASTM D2240 ,Bulk rubber InherentSurfaceTack 2 (1 sided ) Heat Capacity ,ASTM E1269,J/g-K 1.3 Application Thermalmanagement, Density ,Bulk rubber,ASTM D792,g/cc 2.1 TIM(ThermalInterfaceMaterial) Flammability, UL94 V-0 Operating Temperature-60 to 200C Young s Modulus ,ASTM D575 kPa 310 Range (psi) (45 ) Electrical Properties FEATURES AND BENEFITS DielectricBreakdown Voltage ,ASTM D149,VAC >6,000 ThermalConductivity: 1.5W/m-K DielectricConstant ,ASTM D150,1,000Hz 6.0 Fiberglassreinforcedfor puncture, shear and tear 11 Volume Resistivity ,ASTM D257,ohm-meter 110 resistance Easy releaseconstruction Thermal Properties Electricallyisolating ThermalConductivity ,ASTM D5470 ,W/(m-K) 1.5 ThermalImpedance ,0.020 inch 2 BERGQUIST GAP PAD TGP 1500R has the same highly ASTM D5470 ,C-in /W: conformable,low-modulus polymer as the standard GAP PAD 10% Deflection 1.07 TGP 1500. The fiberglassreinforcementallows foreasy 20% Deflection 0.88 materialhandling and enhances puncture, shearand tear 30% Deflection 0.82 resistance. The recordedvalue includes interfacialthermalresistance. The natural tack on both sides of the materialallows forgood These values are provided for referenceonly. Actual compliance to mating surfacesof components, furtherreducing application performanceis directly related to the surface thermalresistance. roughness,flatnessand pressureapplied. TYPICAL APPLICATIONS GENERAL INFORMATION Telecommunications For safe handling information on this product, consult the Computer and peripherals Safety Data Sheet, (SDS). Power conversion RDRAM memory modules /chipscalepackages Not for product specifications Areaswhere heat needs to be transferredto a frame The technical data contained hereinareintended as reference chassisorothertype of heat spreader only. Please contact your local quality department for assistance and recommendations on specificationsforthis product.TDS BERGQUIST GAP PAD TGP 1500R, October -2018 except ifotherwise explicitly agreedand except in relationto death orpersonal CONFIGURATIONS AVAILABLE injury caused by our negligenceand any liabilityunder any applicablemandatory BERGQUIST GAP PAD TGP 1500R is available in the product liabilitylaw. following configurations: In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is Sheet form applicable: The data contained hereinarefurnished forinformation only and arebelieved to Die-Cut parts be reliable.We cannot assume responsibilityforthe resultsobtained by others Rollform over whose methods we have no control. It is the user s responsibilityto determine suitability forthe user spurpose of any production methods mentioned hereinand to adopt such precautions as may be advisable forthe protection of Natural tack both sideswith fiberglass. propertyand of personsagainst any hazards that may be involved in the handling and use thereof.In lightof the foregoing,Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of STORAGE merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporations products. Henkel Corporation specifically Store product in the unopened container in a dry location. disclaims any liability for consequential or incidental damages of any kind, Storageinformationmay be indicated on the product container including lost profits. The discussion herein of various processesor labeling. compositions isnot to be interpretedas representationthat they arefreefrom domination of patents owned by others oras a licenseunder any Henkel Optimal Storage:25C (3), 50% RH (10) fora 12 months Corporationpatents that may cover such processesor compositions. We recommend that each prospective user test his proposed application before shelf life.Materialremoved from containers may be repetitiveuse, using this data as a guide. Thisproduct may be covered by one or contaminated during use. Do not returnproduct to the original moreUnited States orforeignpatents orpatent applications. container.Henkel Corporationcannot assume responsibilityfor Trademark usage: Except as otherwise noted Alltrademarksin this document product which has been contaminated or stored under aretrademarksand/or registeredtrademarksof Henkel and its affiliatesin the U.S.and elsewhere. conditions other than those previously indicated. Ifadditional information is required,pleasecontact your localTechnical ServiceCenterorCustomer ServiceRepresentative. Reference1 Conversions (C x 1.8)+ 32 =F kV/mm x 25.4 =V/mil mm /25.4 =inches N x 0.225=lb N/mm x 5.71=lb/in psi x 145 =N/mm MPa =N/mm Nm x 8.851 = lbin Nm x 0.738=lbft Nmm x 0.142 =ozin mPas =cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations foruse and application of the product arebased on our knowledge and experienceof the product as at the date of this TDS. The product can have a variety of differentapplicationsas well as differingapplication and working conditions in your environment that arebeyond our control.Henkel is, therefore,not liableforthe suitability of our product forthe production processes and conditions in respectof which you use them, as well as the intended applicationsand results.We strongly recommend that you carryout your own priortrialsto confirmsuch suitability of our product. Any liabilityin respectof the informationin the TechnicalData Sheet orany other written ororalrecommendation(s) regardingthe concerned product isexcluded, except ifotherwise explicitly agreedand except in relationto death orpersonal injury caused by our negligenceand any liabilityunder any applicablemandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkel would be nevertheless held liable,on whatever legalground, Henkels liabilitywillin no event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations foruse and application of the product arebased on our knowledge and experienceof the product as at the date of this TDS. Henkel is, therefore,not liableforthe suitability of our product forthe production processes and conditions in respectof which you use them, as well as the intended applicationsand results.We strongly recommend that you carryout your own priortrialsto confirmsuch suitability of our product. Any liabilityin respectof the informationin the TechnicalData Sheet orany other written ororalrecommendation(s) regardingthe concerned product isexcluded, Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.3898.4800 For the most direct access to local sales and technical support visit: www.henkel.com/electronics