MM01019

Safety Data Sheet Revision Number: 004.0 Issue date: 02/17/2017 1. PRODUCT AND COMPANY IDENTIFICATION Product name: LOCTITE 370 SN60 5C 0.38MM R IDH number: 389261 known as 60/40 370 5C 0.38MM 0.25KG AM Product type: Solder Wire Item number: MM01019 Restriction of Use: None identified Region: United States Company address: Contact information: Henkel Corporation Telephone: (860) 571-5100 One Henkel Way MEDICAL EMERGENCY Phone: Poison Control Center Rocky Hill, Connecticut 06067 1-877-671-4608 (toll free) or 1-303-592-1711 TRANSPORT EMERGENCY Phone: CHEMTREC 1-800-424-9300 (toll free) or 1-703-527-3887 Internet: www.henkelna.com 2. HAZARDS IDENTIFICATION EMERGENCY OVERVIEW DANGER: CAUSES SKIN AND EYE IRRITATION. MAY CAUSE DROWSINESS OR DIZZINESS. SUSPECTED OF CAUSING CANCER. MAY DAMAGE FERTILITY OR THE UNBORN CHILD. CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE. HAZARD CLASS HAZARD CATEGORY SKIN IRRITATION 2 EYE IRRITATION 2B CARCINOGENICITY 2 REPRODUCTIVE TOXICITY 1B SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE 3 SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE 1 PICTOGRAM(S) Precautionary Statements Prevention: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust or fumes. Wash affected area thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well- ventilated area. Wear protective gloves, clothing, eye and face protection. Response: IF ON SKIN: Wash with plenty of water. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical attention. If skin irritation occurs: Get medical attention. If eye irritation persists: Get medical attention. Take off contaminated clothing. Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up. IDH number: 389261 Product name: LOCTITE 370 SN60 5C 0.38MM R known as 60/40 370 5C 0.38MM 0.25KG AM Page 1 of 6 Disposal: Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations. Classification complies with OSHA Hazard Communication Standard (29 CFR 1910.1200) and is consistent with the provisions of the United Nations Globally Harmonized System of Classification and Labeling of Chemicals (GHS). See Section 11 for additional toxicological information. 3. COMPOSITION / INFORMATION ON INGREDIENTS Hazardous Component(s) CAS Number Percentage* Tin 7440-31-5 50 - 60 Lead 7439-92-1 30 - 40 * Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections. 4. FIRST AID MEASURES Inhalation: Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. If symptoms develop and persist, get medical attention. Skin contact: Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse. Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention. Ingestion: DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If symptoms develop and persist, get medical attention. Symptoms: See Section 11. 5. FIRE FIGHTING MEASURES Extinguishing media: Water spray (fog), foam, dry chemical or carbon dioxide. Special firefighting procedures: Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Do not use water on fires where molten metal is present. Unusual fire or explosion hazards: In case of fire, keep containers cool with water spray. Hazardous combustion products: Oxides of carbon. Oxides of Metals in Section 3. Formaldehyde. High temperatures may produce heavy metal dust, fumes or vapours. The flux medium will give rise to irritating fumes. 6. ACCIDENTAL RELEASE MEASURES Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Environmental precautions: Do not allow product to enter sewer or waterways. Clean-up methods: Ensure adequate ventilation. Wear suitable protective clothing, gloves and eye/face protection. Scrape up spilled material and place in a closed container for disposal. IDH number: 389261 Product name: LOCTITE 370 SN60 5C 0.38MM R known as 60/40 370 5C 0.38MM 0.25KG AM Page 2 of 6