Interactive Catalog Replaces Catalog Pages Honeywell Sensing and Control has replaced the PDF product catalog with the new Interactive Catalog. The Interactive Catalog is a power search tool that makes it easier to find product information. It includes more installation, application, and technical Click this icon to try the new information than ever before. Interactive Catalog. Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Safety Products Safety Products CLSX Series Maintained Explosion-Proof Cable Pull Limit Switch FEATURES 1 Direct acting contacts enhance reliability 1 Cable length may be up to 200 ft. in a straight line 1 Maintained version has broken/ slackened cable detection for added safety 1 Tension indicator mark for easy adjustment 1 Sealing meets applicable portions of NEMA 1, 3, 4, 7, 9, and 13 1 10 amps continuous carry electrical rating 1 1/2 or 3/4 inch conduit opening 1 UL Listed 1 CSA Certified 1 Internal grounding screw NEMA standards: 1, 3, 4, 7, 9, and 13. UL listed and CSA certified: Class I, Div. 1, Groups B, C and D. Class II, Div. 1, Groups MAINTAINED (MANUAL RESET) OPERATING HEAD E, F and G. Maintained CLSX Series Cable Pull Limit Switches are designed for use in emergency stop applications. TYPICAL APPLICATIONS 1 Petroleum Plants Maintained CLSX switches provide a means to manually force disconnection of a normally 1 Chemical Plants closed control circuit by pulling on an attached cable. The switch contacts remain actuated 1 Mining Conveyors until the switch is reset by manually depressing the reset button located on the operating head. Contact transfer also occurs when the cable is slackened or broken. SEALS CLSX Switches are for use either indoors or outdoors in hazardous atmospheres as they are a completely sealed explosion-proof device. Application proven HDLS head seals are retained to seal the top of the CLSX. The circular cover on the front is easily unscrewed to expose the switching elements for wiring or re- placement. A screwdriver or bar used on the wrenching lugs extending from the front of the cover allows easy removal or tightening. An O-ring seal is located between the housing and cover. The CLSX withstands pressure of an internal explosion and cools the exploding gases be- low the kindling temperature of the explosive atmosphere. Flame paths are provided by the cover-housing threads and an extended plunger between the switch cavity and head. D46 Honeywell1 Sensing and Control1 1-800-537-6945 USA1 F1-815-235-6847 International1 1-800-737-3360 Canada