6mm Hazardous Location Interface Relays - RV8H Series Screw Terminals Spring Clamp Terminals Top view with Top view without Marking Plate Marking Plate Only 70mm from DIN rail Only 70mm from DIN rail Key Features Specifications Class I, Division 2 and Class I, Zone 2 Class I, Division2, Groups A, B, C, D T4A hazardous locations Class I, Zone 2, AEx nA nC IIC T4 Hazardous Location Rating Class I, Zone 2, Ex nA nC IIC T4 X Gc Space-saving 6mm width UL/c-UL Listed Only 70mm in height from DIN rail Number of Poles 1 pole Gold-plated contacts Contact Configuration 1 form C (SPDT) Pre-assembled relay and DIN mount socket Contact material AgNi (Au plating) Universal screw terminals (flat and Phillips) or Spring Degree of Protection IP20 clamp terminals Between contact and coil 4,000V AC for 1min Dielectric Universal AC/DC socket with built-in surge suppression strength Between pole 1,000V AC for 1min and green LED Operating extremes 6A contact rating Vibration NO: Frequency 10 to 55Hz, Amplitude 0.5mm Resistance NC: Frequency 10 to 55Hz, Amplitude 0.2mm Damage limits Lever for easy locking and removal of relay 2 NO: 49m/s (5G) Wide input voltage range: 6 to 240V Operating extremes Shock 2 NC: 29.4m/s (3G) High dielectric strength and impulse withstand voltages Resistance 2 Damage limits 980m/s (10G) Operating Temperature: -40C ~ +70C Over 10,000,000 operations Mechanical Life (without load) Reverse Polarity protected (operation frequency 18,000 operations per hour) 400V AC maximum switching voltage -40 to +70C without freezing Operating Temperature (-40 to +55C for AD110 and AD220 coil voltages) 1500VA maximum switching power Operating Humidity 5 to 85% (without condensation) RoHS compliant Weight (approx.) 30g (RV8H-L), 26g (RV8H-S) (when using combination of RV relay and SV socket) Now available Class I Div 2Part Numbers Complete Part Numbers (Relay & Socket) and Replacement Relay Screw Terminals Spring Clamp Terminals Complete Unit Complete Unit Relay Only Relay Only Standard Hazardous Location (Class I Div 2) Standard Hazardous Location (Class I Div 2) Coil voltage Complete Part Replacement Complete Part Replacement Complete Part Replacement Complete Part Replacement Number (Relay Only) Number (Relay Only) Number (Relay Only) Number (Relay Only) 6V RV8H-L-D6 RV1H-G-D5 RV8H-L-D6-C1D2 RV1H-G-D5-C1D2 RV8H-S-D6 RV1H-G-D5 RV8H-S-D6-C1D2 RV1H-G-D5-C1D2 9V RV8H-L-D9 RV1H-G-D9 RV8H-L-D9-C1D2 RV1H-G-D9-C1D2 RV8H-S-D9 RV1H-G-D9 RV8H-S-D9-C1D2 RV1H-G-D9-C1D2 DC 12V RV8H-L-D12 RV1H-G-D12 RV8H-L-D12-C1D2 RV1H-G-D12-C1D2 RV8H-S-D12 RV1H-G-D12 RV8H-S-D12-C1D2 RV1H-G-D12-C1D2 18V RV8H-L-D18 RV1H-G-D18 RV8H-L-D18-C1D2 RV1H-G-D18-C1D2 RV8H-S-D18 RV1H-G-D18 RV8H-S-D18-C1D2 RV1H-G-D18-C1D2 24V RV8H-L-D24 RV1H-G-D24 RV8H-L-D24-C1D2 RV1H-G-D24-C1D2 RV8H-S-D24 RV1H-G-D24 RV8H-S-D24-C1D2 RV1H-G-D24-C1D2 12V RV8H-L-AD12 RV1H-G-D12 RV8H-L-AD12-C1D2 RV1H-G-D12-C1D2 RV8H-S-AD12 RV1H-G-D12 RV8H-S-AD12-C1D2 RV1H-G-D12-C1D2 18V RV8H-L-AD18 RV1H-G-D18 RV8H-L-AD18-C1D2 RV1H-G-D18-C1D2 RV8H-S-AD18 RV1H-G-D18 RV8H-S-AD18-C1D2 RV1H-G-D18-C1D2 24V RV8H-L-AD24 RV1H-G-D24 RV8H-L-AD24-C1D2 RV1H-G-D24-C1D2 RV8H-S-AD24 RV1H-G-D24 RV8H-S-AD24-C1D2 RV1H-G-D24-C1D2 AC/DC 48V RV8H-L-AD48 RV1H-G-D48 RV8H-L-AD48-C1D2 RV1H-G-D48-C1D2 RV8H-S-AD48 RV1H-G-D48 RV8H-S-AD48-C1D2 RV1H-G-D48-C1D2 60V RV8H-L-AD60 RV1H-G-D60 RV8H-L-AD60-C1D2 RV1H-G-D60-C1D2 RV8H-S-AD60 RV1H-G-D60 RV8H-S-AD60-C1D2 RV1H-G-D60-C1D2 110V - 125V RV8H-L-AD110 RV1H-G-D60 RV8H-L-AD110-C1D2 RV1H-G-D60-C1D2 RV8H-S-AD110 RV1H-G-D60 RV8H-S-AD110-C1D2 RV1H-G-D60-C1D2 220V - 240V RV8H-L-AD220 RV1H-G-D60 RV8H-L-AD220-C1D2 RV1H-G-D60-C1D2 RV8H-S-AD220 RV1H-G-D60 RV8H-S-AD220-C1D2 RV1H-G-D60-C1D2 Accessories Marking Plates (Blank and Pre-marked) Description Color Part Number Item Part Number Engraving Note 1 Jumper (20 combs ) SV9Z-PW10 blank Black SV9Z-J20B 1-10 SV9Z-PW10-j1-10 Gray SV9Z-J20W 11-20 SV9Z-PW10-j11-20 SV9Z-PW10-j21-30 21-30 Blue SV9Z-J20S Note 2 Rated current: 6A SV9Z-PW10-j31-40 31-40 Note 3 Spacer (circuit separator) SV9Z-PW10-j41-50 41-50 51-60 SV9Z-PW10-j51-60 - SV9Z-SA2W 61-70 SV9Z-PW10-j61-70 SV9Z-PW10-j71-80 71-80 SV9Z-PW10-j81-90 81-90 SV9Z-PW10-j91-100 91-100 Screwdriver SV9Z-PW10-jA-J A-J - BC1S-SD0 K-T SV9Z-PW10-jK-T U-Z SV9Z-PW10-jU-Z SV9Z-PW10-jGROUND 1. Jumper combs come with 20 points, if shorter lengths are needed simply cut off the excess points. SV9Z-PW10-jAC 2. Ensure that the total current to the jumper does not exceed 1. In place of j insert orientation code: V=Vertical, H=Horizontal the overall rated current. 2. Each unit has 10 pieces (marking plates). 3. Width of spacer: 2mm 4. When using a cut jumper, please use a spacer on the cut side. For additional information see instruction sheet. New New Horizontal Orientation Vertical Orientation