1EDIxxI12MH EiceDRIVER 1EDI Compact Single channel IGBT gate driver IC with clamp in wide body package Features Single channel isolated gate driver For 600 V/650 V/1200 V IGBTs, MOSFETs, and SiC MOSFETs Up to 6 A typical peak current at rail-to-rail output Active Miller clamp Galvanically isolated coreless transformer driver Wide input voltage operating range Suitable for operation at high ambient temperature and in fast switching applications Potential applications AC and brushless DC motor drives High voltage DC/DC-converter and DC/AC-inverter Induction heating resonant application UPS-systems Welding Solar Product type Minimum output current and configuration Package 1EDI10I12MH 1.0 A with 1.0 A Miller clamp PG-DSO-8-59 1EDI20I12MH 2.0 A with 2.0 A Miller clamp PG-DSO-8-59 1EDI30I12MH 3.0 A with 3.0 A Miller clamp PG-DSO-8-59 Product validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22. Datasheet Please read the Important Notice and Warnings at the end of this document 2.1 www.infineon.com/eicedriver 2017-09-04 EiceDRIVER 1EDI Compact Single channel IGBT gate driver IC with clamp in wide body package Description Description The 1EDIxxI12MH are galvanically isolated single channel IGBT driver in a PG-DSO-8-59 package that provide output currents up to 3 A and an integrated active Miller clamp circuit with the same current rating to protect against parasitic turn on. The input logic pins operate on a wide input voltage range from 3 V to 15 V using scaled CMOS threshold levels to support even 3.3 V microcontrollers. Data transfer across the isolation barrier is realized by the coreless transformer technology. Every driver family member comes with logic input and driver output undervoltage lockout (UVLO) and active shutdown. VCC1 VCC2,H OUT IN+ Single channel TM EiceDRIVER IN- with CLAMP CLAMP GND1 GND2,H Control VCC1 VCC2,L OUT IN+ Single channel TM EiceDRIVER IN- with CLAMP CLAMP GND1 GND2,L Figure 1 Typical application Datasheet 2 2.1 2017-09-04