BTN9990LV NovalithIC + High current PN half-bridge with integrated driver Features AEC-Q100/Q006 qualified (Grade 1) Supply voltage range 8 V - 18 V (max up to 40 V) Path resistance of typ. 5.3 m 25C (max. 9.6 m 150C) Low quiescent current of max. 3.3 A 85C Protection features: overcurrent, undervoltage, overtemperature Overcurrent detection level of 75 A min Eight selectable switching slew rates for optimized EME Status flag diagnosis with feedback of current sense, temperature Package Marking and slew rate PG-HSOF-7-1 BTN9990 (sTOLL) Potential applications Automotive 12 V brushed DC Motor Fuel pump Power liftgate HVAC blower Reverse polarity protection VBAT DZ1 10 V R3 R1 VS BTN9990LV 10 k C1 1 k 100 nF VS OUT INH R2 CO2V * 1 k C10 CDC-Link Micro- OUT 100 nF ~1000 F OUT IN M controller IN C11 COUT* IS 10 mF ADC CIS RIS GND 1 nF 2 k *) CO2V , COUT (~10 nF) optional to otpimize EMC Figure 1 Typical application Product validation Qualified for automotive applications. Product validation according to AEC-Q100. Description The BTN9990LV is an integrated high current half-bridge for motor drive applications. It is part of the integrated half-bridge NovalithIC + family containing one p-channel high-side MOSFET and one n-channel low-side MOSFET with an integrated driver IC in one package. Due to the p-channel high-side switch the need for a charge pump is eliminated thus minimizing EME. Interfacing to a microcontroller is made easy by the integrated Datasheet Please read the Important Notice and Warnings at the end of this document Rev. 1.0 www.infineon.com 2021-10-12 BTN9990LV NovalithIC + High current PN half-bridge with integrated driver Description driver IC which features logic level inputs, diagnosis with current sense, slew rate adjustment, dead time generation and protection against overtemperature, undervoltage, overcurrent and short circuit. The BTN9990LV provides a cost optimized solution for protected high current PWM motor drives with very low board space consumption. Datasheet 2 Rev. 1.0 2021-10-12