CDM10V-2 Flexible 0-10V Dimming Solution Feature list Simplest 0-10 V design on the market. CDM10V-2 comes with following key settings: - 1kHz PWM frequency - 200A Dimmer/Resistor Bias current - Dim-To -Off enabled Wide input V range from 11 to 25 V cc Replaces many external components with a single chip reducing BOM and PCB space Minimum variation from device to device Applications LED Drivers needing 0-10 V Dimming Circuits Industrial and Commercial Dimmable Applications: Luminaires, Troffers, Downlights, Sconces, Undercabinet, Office Lighting, Signage applications, Dali applications Product Type Package CDM10V-2 SOT23-6 Description CDM10V-2 is a fully integrated 0-10 V dimming interface IC and comes in a SOT-23-6 package to cover space requirements on small PCBs. The device is targeted for various dimming applications in lighting. The IC can be used to transmit analog voltage based signals from a 0-10 V dimmer or potentiometer to the dimming or PWM input of a lighting controller IC in the form of a 5 mA current based PWM signal to drive an external opto-coupler. It replaces many components in a traditional solution and reduces BOM and PCB space significantly. The CDM10V-2 IC outputs a 0 - 100% PWM current signal at 1 kHz with an amplitude value of 5 mA. Embedded digital signal processing maintains minimum variations from device to device. Datasheet Please read the Important Notice and Warnings at the end of this document V1.1 www.infineon.com 2017-08-04CDM10V-2 Flexible 0-10V Dimming Solution Table of contents Table of contents Feature list . 1 Applications 1 Description .1 Table of contents . 2 1 Block diagram reference 3 2 Pin configuration . 3 3 Functional description 4 4 Electrical characteristics and parameters 7 5 Package dimensions 9 6 References 11 Revision history . 11 Trademarks . 12 Datasheet 2 V1.1 2017-08-04