Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.com S6E2G Series 32-bit Arm Cortex -M4F FM4 Microcontroller S6E2G Series are FM4 devices with up to 180 MHz CPU, 1 MB flash, 192 KB SRAM, 20x communication peripherals, 33x digital peripherals and 3x analog peripherals. They are designed for industrial automation and metering applications. Devices in the S6E2G Series are highly integrated 32-bit microcontrollers with high performance and competitive cost. This series is based on the Arm Cortex -M4F processor with on-chip flash memory and SRAM. The series has peripherals such as motor control 2 timers, A/D converters, and communications interfaces (USB, CAN, UART, CSIO (SPI), I C, LIN). The products that are described in this data sheet are placed into TYPE5-M4 product categories in theFM4 Family Peripheral Manual Main Part (002-04856). Features 32-bit Arm Cortex-M4F Core Watch Counter Up to 180 MHz frequency operation External Interrupt Controller Unit On-chip Memories Flash memory: Up to 1024 Kbytes Watchdog Timer (Two channels) SRAM memory: Cyclic Redundancy Check (CRC) Accelerator SRAM0: up to 128 Kbytes SD Card Interface Available on S6E2GM, S6E2GH, and SRAM1: 32 Kbytes S6E2GK Devices Only SRAM2: 32 Kbytes Ethernet-MAC Available on S6E2GM, S6E2GK, and Direct Memory Access (DMA) Controller (Eight Channels) S6E2G2 Devices only Descriptor System Data Transfer Controller (DSTC) Smartcard Interface (Max 2 channels) 256 channels Five Clock Sources External Bus Interface Six Reset Sources USB Interface (Max two channels): Host and Device Clock Supervisor (CSV) CAN Interface (Max one channel) Available on S6E2GM and S6E2GH Devices Only Low-Voltage Detector (LVD) Multi-function Serial Interface (Max 10 Channels) Six Low-power Consumption Modes UART (Universal Asynchronous Receiver/Transmitter) Sleep Clock Synchronous Serial Interface (CSIO (SPI)) Timer Local Interconnect Network (LIN) RTC 2 Inter-Integrated Circuit (I C) Stop 2 Inter-IC Sound (I S) Deep standby RTC Deep standby stop Base Timer (Max 16 channels) Peripheral Clock Gating System General Purpose I/O Port Up to 121 high-speed general-purpose I/O ports in 144-pin Crypto Assist Function package Debug Up to 153 high-speed general-purpose I/O ports in 176-pin Serial wire JTAG debug port (SWJ-DP) package Embedded trace macrocells (ETM) provide comprehensive Multi-function Timer (Max two units) debug and trace facilities. AHB trace macrocells (HTM) Real-Time Clock (RTC) 41-bit Unique ID Analog to Digital Converter (ADC) (Max 32 Channels) Wide range voltage: VCC = 2.7 to 5.5 V Dual Timer (32-/16-bit Down Counter) Quadrature Position/Revolution Counter (QPRC Max two channels) Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 001-98708 Rev. *E Revised June 24, 2019